Company Profile

Contact Information

Phone: (631) 231-1700 ext. 9220
Fax: (631) 231-1711

Location

L3 Narda-MITEQ
435 Moreland Road
Hauppauge NY 11788
United States

L3 Narda-MITEQ combines more than 60 years of innovation and expertise in microwave and RF technology. Narda-MITEQ designs and manufactures both standard and custom products with stock delivery offered for an extensive offering of catalog components. We offer a broad range of Passive and Active Components, Subsystems, Mechanical Switches, IMAs, SATCOM Solutions, Spaceborne Components, as well as RF Safety monitoring equipment. Our products and services support defense, research, communications, and medical and scientific end markets.

Articles

Narda Announces New Booklet for Selecting the Best PIN Diode Control Product for an Application

PINdiode ProdPIN diodes are essential tools in the designer’s handbook. There are many resources that provide information about PIN diode characteristics and integration. However, practical information about selecting the proper PIN diode-based product for a specific application is extremely hard to find. Narda’s new PIN Diode Control Products Application Note was created to fill this void.


Read More

Narda's 6 to 18 GHz Coupler Meets MIL Demands

Narda , an L-3 Communications company, introduced the model 4246B-10, a miniature stripline coaxial microwave coupler that delivers 10 dB of coupling from 6 to 18 GHz, has an extremely flat frequency response, and is designed to meet military requirements. The model 4246B-10 handles 50 W of average power...
Read More

Narda Unveils DQPSK Modulator Driver for Lightwave Systems

Narda , an L-3 Communications company, introduced the Model FO-MDA-20-25DD-1, a dual-channel DQPSK modulator driver for 40 Gb/s and 100 Gb/s optical transponder applications that has been tested at data rates as high as 113 Gb/s, demonstrating excellent performance even at the highest data rates. The FO-MDA-20-25DD-1 is designed...
Read More

Narda Showcases Full Product Portfolio

As it has for decades, the International Microwave Symposium will be a major showcase for the products of Narda Microwave-East . Narda has made significant advances in virtually every area of its portfolio since last year’s symposium, from its rapidly-expanding family of innovative microwave integrated circuits (MIC) to modulator...
Read More

Executive Interview with Joseph Merenda

Joseph Merenda - Vice President of Engineering, Narda Microwave-East talks about achieving higher levels of functional integration through microwave integrated circuit (MIC) technology. Joseph explains when MIC should be the technology of choice and how innovations continue to enhance its performance, capabilities and cost.


Read More

Narda to Showcase Advanced Microwave IC Technologies

Narda , an L-3 Communications company, will showcase its advanced microwave integrated circuit (MIC) technology that combines microwave hybrid manufacturing with multilayer printed circuit boards and advanced digital devices in Booth 1600 . Narda's proprietary techniques enable higher levels of microwave, digital and analog functional integration than is achievable...
Read More

Products

Nine Variable Attenuator Models

attenuator product line

Narda Microwave-East, an L-3 Communications company, announced the expansion of its attenuator product line that features nine new variable attenuator models. Included in the variable attenuator product line are: miniature, broadband and high power units. These units feature low minimum insertion loss, small size and an adjustable attenuation range of up to 30 dB. Additionally, they can be deployed in operational temperatures up to 105°C.


Read More

PIN Diode Based Limiters

Limiters Series BroadbandNarda offers a wide range of PIN diode based limiters. The wideband limiters that are part of this line cover 1 to 18 GHz in one band. They support power handling up to 6000 W of pulsed power. The limiters were designed to meet severe environmental conditions for airborne and other applications.


Read More

Two-Way Power Divider: 2372A-2

Narda2372A-2Model 2372A-2 is a high-power, 2-way power divider that operates from 500 MHz to 2.5 GHz, handles up to 250 W CW input power (2 kW peak power), and is well suited for both commercial and military applications. It employs Type-N female connectors and measures 3.5 in. x 2.5 in. x 1 in.


Read More

Directional Couplers

narda_product1Narda offers a broad range of RF and microwave directional couplers in the frequency range from 500 MHz to 40 GHz. Key types include octave, multi-octave and ultra-broadband models, sub-miniature stripline models, high directivity reflectometers, high-power airline couplers, and economical models for wireless applications.


Read More

Attenuators

narda_product2Narda offers RF and microwave attenuators to cover the frequency range fro DC to 18 GHz. Key types of attenuators include miniature fixed, medium and high power, variable and stepped.


Read More

Power Dividers & Combiners

Narda offers hundreds of standard, off-the-shelf, microwave power dividers in the 500 MHz to 40 GHz.. Key types include octave, multi-octave and ultra-broadband models: 2-way, 3-way, 4-way, 6-way, 8-way and 16-way models, high-power and special models, and economical models for wireless applications.
Read More

PIN Switches

Narda, offers a broad range of RF and microwave PIN switches and control products in the frequency range from DC to 40 GHz. Key products include PIN switches for narrowband and broadband applications, voltage variable attenuators, switched filter banks, and switch matrix configurations.
Read More

Catalog Amplifiers from Narda Microwave East

NardaEastsmallNarda Microwave East announces that it is adding stocked microwave amplifiers to its portfolio of microwave catalog components. Sub-octave, octave and multi-octave bandwidth models at frequencies between 0.5 and 18 GHz featuring low noise with output power to +30 dBM. Popular models will be available off the shelf.


Read More

Model 10512 programmable signal source

Narda_Model_10512_100The Model 10512 is a programmable signal source that digitally creates frequency-modulated “noise” waveforms and applies them to a carrier whose center frequency can be varied +/-50 MHz in less than 100 ns. It is well suited for use as a fast-hopping signal generator, programmable noise source, or arbitrary signal generator.


Read More

EML Driver FO-MDA-40-15D-1

NardaFOMDA4015D1_100Narda Microwave-East, an L-3 Communications (NYSE: LLL) company, today announced the FO-MDA-40-15D-1, a low-cost, high-performance EML driver for 40-Gb/s lightwave communication systems. The FO-MDA-40-15D-1 is optimized for VSR 300-pin MSA SFF transponders. It offers dual inputs that mate directly with standard multiplexers.


Read More

375BNM Coaxial Fixed Termination

Narda-375BNM_100Narda, an L-3 Communications company, today introduced the Model 375BNM coaxial fixed termination that operates from DC to 18 GHz and is a rugged, low-cost device that is an excellent choice for a wide array of general-purpose applications. The Model 375BNM handles 10 W average and 5 kW peak RF power, has a maximum VSWR of 1.05:1, measures 1.67 in. long including Type-N connector and 0.72 in. diameter, and weighs 3 oz. (85 g).


Read More

Model 3306-2 Power Divider

Narda-3306-divider_100Narda, an L-3 Communications (NYSE: LLL) company, today introduced the Model 3306-2, a two-way power divider that handles up to 100 W CW from 6 to 18 GHz into a 1.5:1 VSWR and meets military requirements, making it an excellent choice for a wide array of aerospace and defense as well as commercial applications.


Read More

600 Series Gain Horn Antennas

Narda-642-horn_100Narda, an L-3 Communications company, introduced a family of standard gain horn antennas for EMI and EMC testing applications that cover every waveguide band from 2.6 to 40 GHz. The 600 Series horns include seven standard models that cover 2.6 to 3.95 GHz, 3.95 to 5.85 GHz, 5.4 to 8.2 GHz. 8.2 to 12.4 GHz, 14 to 18 GHz, 18 to 26.5 GHz, and 26.5 to 40 GHz. Directivity patterns for all models.


Read More

Coaxial Terminations 368BNM and 369BNM

Narda-368-100Narda, an L-3 Communications (NYSE: LLL) company, introduced the Model 368BNM and Model 369BNM coaxial terminations that operate from 2 to 18 GHz and 700 MHz to 18 GHz respectively, and are extremely rugged for use in applications ranging from instrumentation to transmitters in the field.


Read More

DQPSK Modulator Driver: FO-MDA-20-25DD-1

Narda_100Narda, an L-3 Communications (NYSE: LLL) company, today introduced the Model FO-MDA-20-25DD-1, a dual-channel DQPSK modulator driver for 40-Gb/s and 100-Gb/s optical transponder applications that has been tested at data rates as high as 113 Gb/s, demonstrating excellent performance even at the highest data rates.


Read More

4-Way Power Divider, Model 3326B-4

Narda-3326B_100Narda, an L-3 Communications company, today introduced the Model 3326B-4 four-way power divider, which operates from 6 to 18 GHz and features precise phase and amplitude balance, high port-to-port isolation, and low input VSWR. The power divider is well suited for a broad array of commercial and military applications.


Read More

Model 4246B-10 Stripline Coupler

Narda-4246B-coupler_100Narda, an L-3 Communications (NYSE: LLL) company, today introduced the Model 4246B-10, a miniature stripline coaxial microwave coupler that delivers 10 dB of coupling from 6 to 18 GHz, has an extremely flat frequency response, and is designed to meet military requirements.


Read More

Ku-band Block Up Converter

RS-268Narda is capitalizing on its Ultimate SMTSM Technology to produce low cost BUC/BDC modules for X-, Ku- and Ka-band SATCOM applications. These complex integrated microwave assemblies (IMA) are constructed using a single multilayer board with the microwave circuitry on the top side and the control circuitry on the bottom.


Read More

4772-3 Mini Fixed 3-dB Attenuator

4772attenuator-100Narda's Model 4772-3 is a miniature fixed 3 dB attenuator that has flat frequency response, low VSWR, and meets environmental requirements for MIL-A-3933. The attenuator measures only 1.24 x 0.38 in. and weighs 0.5 oz. It handles 2 W average and 200 W peak RF input power, has a VSWR of 1.4:1 or less, and attenuation deviation of +/- 0.3 dB or less. Connectors are stainless steel SMA female.


Read More

Electromechanical Microwave Switch

NardaSEM066-100Narda, an L-3 Communications (NYSE: LLL) company introduced the SEM066 high-performance SP6T electromechanical microwave switch that covers 2 to 18 GHz and is an excellent choice for defense applications that require broad operating bandwidth along with ruggedness and long-term reliability in the field.


Read More

Power Dividers

Narda4436-2dividerNarda, an L-3 Communications company, has introduced the 4436 family of RF power dividers that operate from 500 MHz to 8 GHz and are available in two-way, three-way, four-way, and eight-way versions. The power dividers are a cost-effective solution for commercial and defense applications.


Read More

Downloads

PIN Diode Control Products Application Note

PIN diodes are essential tools in the designer’s handbook. There are many resources that provide information about PIN diode characteristics and integration. However, practical information about selecting the proper PIN diode-based product for a specific application is extremely hard to find.

Narda’s new PIN Diode Control Products Application Note was created to fill this void. It includes basic discussions of PIN diode characteristics, the most commonly used PIN-diode based products, and the trade-offs encountered in designing products around them. The merits of various types of control products within a specific category (analog and digital attenuators, for example) are discussed as well.

Download

Narda Defense Technology Solutions Leads the Way into the Future

With today’s emphasis on superior performance in a smaller, lighter, more cost-effective package, why settle for yesterday’s chip and wire solutions? Narda Defense Technology Solutions has pioneered the development of high performance, densely packaged Integrated Microwave Assemblies and Sub-Systems in footprints previously considered unachievable.

By leveraging commonly available multi-layer board materials with unique interconnection techniques, and incorporating DSP and sophisticated monitor and control functions, our solutions are currently redefining “State of the Art.”

Including: Module and Subsystem Solutions to 40 GHz; Frequency Converters, LNA’s; BUC’s & SSPA’s, EW, Radar, Radio and SATCOM Applications and Pin Diode Switch Products.

Download
Back to Listings