advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Anritsu Co.

Company Profile

Anritsu-logo100x55-040814

Contact Information

Fax: (972) 671-1877

Location

Anritsu Co.
1155 E. Collins Blvd., Ste. 100
Richardson TX 75081
United States
Anritsu Company is the American subsidiary of Anritsu Corporation, a global provider of innovative communications test and measurement solutions for more than 110 years. Anritsu provides solutions for existing and next-generation wired and wireless communication systems and operators. Anritsu products include wireless, optical, microwave/RF, and digital instruments as well as operations support systems for R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed electrical devices for communication products and systems. With offices throughout the world, Anritsu sells in over 90 countries with approximately 4,000 employees.

Products

Broadband System: VectorStar™ ME7838D

April 16, 2014

VectorStar ME7838DAnritsu Co. establishes a new standard in broadband performance with the introduction of the VectorStar™ ME7838D broadband system that provides industry-best frequency coverage of 70 kHz to 145 GHz in a single sweep using a coaxial test port. The VectorStar ME7838D gives design engineers greater confidence when performing on-wafer device characterization at 70 GHz and beyond.

Read More

Vector Network Analyzer: VectorStar™ ME7838E

April 09, 2014

Anritsu_ME7838E_FrontAnritsu Co. introduces the VectorStar™ ME7838E vector network analyzer (VNA) broadband system that provides frequency coverage of 70 kHz to 110 GHz in a single connection. Incorporating all the benefits of the VectorStar ME7838 series broadband system the ME7838E addresses the challenges associated with today’s high-speed device characterization.

Read More

Anritsu introduces industry’s first IMS emergency services test capability

March 26, 2014

Anritsu Co. announces it has developed the wireless industry’s first PTCRB-approved protocol test case for IMS Emergency Services. This critical test case is now available on the ME7834L Protocol Conformance Test (PCT) and Carrier Acceptance Test (CAT) system. Anritsu recently became the only supplier of approved test cases for this increasingly relevant technology during the PVG#64 meeting held in Beijing.

Read More

Handheld Spectrum Analyzer: MS2720T

February 27, 2014

MS2720T Spectrum Master

Anritsu's internal atomic clock option for its MS2720T Spectrum Master handheld spectrum analyzer allows users to acquire excellent frequency accuracy, including in environments in which the GPS cannot be used. Integrating the atomic clock inside the MS2720T provides field engineers and technicians with a durable, handheld spectrum analyzer that can deliver the extremely high accuracy necessary to prove regulatory compliance.

Read More

ME7873L RF/RRM Conformance Test System

February 11, 2014

ME7873L_FrontAnritsu Co. announces that its ME7873L RF/RRM Conformance Test System has achieved the world’s first test platform approval criteria (TPAC) for LTE-advanced carrier aggregation (CA). This industry-leading achievement in the Global Certification Forum (GCF) enables wireless device manufacturers to implement certification of devices employing this new technology. 

Read More

Three-Frequency Options PIM: MW82119A

October 08, 2013

3-freq-options-mw82119aAnritsu Company introduces three frequency options for its industry-leading PIM Master MW82119A Passive Intermodulation (PIM) high-power, battery-operated, portable PIM test analyzer. The new options provide wireless field engineers and technicians with the first battery-operated handheld analyzers that can accurately conduct “top of the tower” PIM measurements in the LTE 800 MHz and UMTS 2100 MHz bands, in addition to the LTE 2600 MHz band.

Read More

Handheld Tester: MT8220T BTS Master

August 27, 2013

MT8220T_FrontAnritsu Company introduces the MT8220T BTS Master, a multi-function handheld durable tester with all the capabilities network operators, sub-contractors, installers, and regulatory authorities need when measuring base stations. By providing multiple testing capabilities, including comprehensive Over-the-Air (OTA) measurements to support Remote Radio Heads (RRH) and MIMO, it is well suited for co-siting of new systems with existing networks.

Read More

LTE Advanced CA Measurement Software: MT8820C

April 03, 2013

MT8820C_FrontAnritsu Company announces the availability of LTE Advanced Carrier Aggregation (CA) Measurement Software for its MT8820C RF tester, enabling analysis of leading-edge mobile devices incorporating the new ultra-fast technology evolution. The new option leverages the ParallelPhone Mode (PPMTM) dual-RF capability of the MT8820C to simulate inter-band and intra-band downlink frequency domain duplex (FDD) CA with call processing.

Read More

Universal Wireless Test Set: MT8870A

October 16, 2012

MT8870A_FrontAnritsu Company introduces the MT8870A universal wireless test set with manufacturing test capability for up to eight user equipment (UE) devices in a single mainframe without the need for external switching. The tester’s basic module includes an integrated vector signal analyzer (VSA), vector signal generator (VSG), and multi-core processor.

Read More

Vector Signal Generator Series: MG3710A

May 11, 2012

MG3710A_FrontAnritsu Company introduces the MG3710A series, a family of innovative vector signal generators that combines high performance and eliminates the need for multiple instruments, thereby reducing operating costs and increasing production yield for designers and manufacturers of multi-system devices and base stations. Its unique design allows the MG3710A to generate test signals based on all leading technologies.

Read More

Bluetooth Test Set: MT8852B

April 16, 2012

Bluetooth_Test_Set_MT8852BThe Anritsu MT8852B Bluetooth Test Set is the market leading RF measuring instrument for design proving and production test of a wide range of products that integrate Bluetooth technology, including; phones, headsets, computers, audio-visual and gaming products as well as modules. In production, a single key press initiates a measurement script that tests a device in less than 10 seconds.

Read More

Spectrum Master MS272xC

March 20, 2012

Spectrum_Master_MS272xCAnritsu's family of Spectrum Master handheld spectrum analyzers offers five models to choose from including the industry’s first 32 GHz and 43 GHz models. Models MS2722C, MS2723C, MS2724C, MS2725C, and MS2726C represents the company’s highest performance handheld spectrum analyzers.

Read More

Broadband Site Master S8x0D

March 15, 2012

Broadband_Site_Master_S8x0DAnritsu’s handheld, battery-operated Broadband Site Master is the most accurate and convenient tool available for field installation, verification, troubleshooting and repair of microwave cables and communication systems. With calibrated vector error correction and a convenient user interface, difficult test specifications become easy to verify, quality is improved and maintenance expenses are reduced.

Read More

BTS Master MT8221B

March 15, 2012

BTS_Master_MT8221BThe BTS Master MT8221B is Anritsu's high performance base station analyzer. From the ground up it has been designed to support 4G standards and installed 2G/3G networks.

Read More

BTS Master MT8222B

March 15, 2012

BTSmasterMT8222BThe BTS Master MT8221B is Anritsu's high performance base station analyzer. From the ground up it has been designed to support 4G standards and installed 2G/3G networks.

Read More

Cell Master MT821xE

March 15, 2012

Cell_Master_MT8212EThe MT8212E and MT8213E Cell Master Base Station Analyzers are the smallest, lightest, and most economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing.

Read More

LMR Master S412E

March 15, 2012

LMR_Master_S412EThe S412E is Anritsu's second generation solution for installing and maintaining public safety systems. Built on Anritsu's ninth generation handheld platform, the S412E combines a high performance receiver / spectrum analyzer with the world's most advanced handheld vector network analyzer plus a CW / P25 / NXDN / DMR signal generator with internally adjustable power from 0 dBm to –120 dBm.

Read More

Site Master S331E

March 15, 2012

Site_Master_S331ETo keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.

Read More

Site Master S332E

March 15, 2012

Site_Master_S332ETo keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.

Read More

Site Master S361E

March 15, 2012

Site_Master_S361ETo keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.

Read More

Site Master S362E

March 15, 2012

Siite_Master_S362ETo keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.

Read More

Spectrum Master MS2711E

March 15, 2012

Spectrum_Master_MS2711ERegulatory requirements are growing. You're under increasing pressure to cut costs. And improving system up-time is always a top priority. The MS2711E Spectrum Master helps you do all of this and more.

Read More

Spectrum Master MS271xE

March 15, 2012

Spectrum_Master_MS271xEAnritsu’s MS2712E and MS2713E Spectrum Master™ spectrum analyzers are designed to handle the most punishing field conditions and allow you to monitor, locate, identify, and analyze a broad range of cellular, land mobile radio, Wi-Fi, and broadcast signals.

Read More

Spectrum Master MS2721B

March 15, 2012

Spectrum_Master_MS2721BThe MS2721B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems.

Read More

VNA Master MS20xxB

March 15, 2012

VNA_Master_MS20xxBThe VNA Master MS202xB/3xB series is a compact handheld multi-function instrument that offers a portable yet powerful vector network analyzer, allowing you to do S-parameter analysis in the field ― anytime, anywhere.

Read More

VNA Master MS20xxC

March 15, 2012

VNA_Master_MS20XXCThe title Grand Master suggests the ultimate level of skill, experience, accomplishment and recognition as best in class. The VNA Master Series is the industry’s highest performance, handheld solution for 2-port, 2-path measurements, anytime, anywhere.

Read More

Cell Master™ Base Station Analyzer: MT8212E

February 21, 2012

MT8212BcellMasterThe value choice for deploying, maintaining and troubleshooting wireless base stations. Compact and lightweight, it combines the functionality of built-in cable and antenna analyzer, spectrum analyzer, power meter, and GPS.

Read More

Handheld Vector Network Analyzer: MS2024B

February 21, 2012

MS2024BanalyzerAnritsu introduces industry's most affordable, yet comprehensive solution, the MS2024B VNA Master (500 kHz to 4 GHz). It's a Vector Network Analyzer, it's a Power Meter and it's a Vector Voltmeter.

Read More

PIM Testing Solution: MW8208A

February 21, 2012

PIMmasterMW8208AAnritsu Company introduces its first generation high performance PIM testing solution, the MW8208A, for the 850 MHz cellular frequency bands. Anritsu has developed the PIM Master to verify if receiver interference at a cell site is due to an intermodulation product of two or more transmit frequencies, also known as passive intermodulation (PIM).

Read More

PIM Testing Solution: MW8219A

February 21, 2012

PIMmasterMW8219AAnritsu Company introduces its first generation high performance PIM testing solution, the MW8219A, for the 1900/2100 MHz PCS/AWS frequency bands. Anritsu has developed the PIM Master to verify if receiver interference at a cell site is due to an intermodulation product of two or more transmit frequencies, also known as passive intermodulation (PIM).

Read More

Vector Network Analyzer: ME7838A

February 21, 2012

ME7838AvnaAnritsu introduces broadband vector network analyzer with industry-best performance from 70 kHz to 110 GHz in single coax connection and up to 0.5 THz with millimeter waveguide extensions. ME7838A ushers in new era in broadband characterization of active and passive devices from DC to daylight.

Read More

Analyzer: MW8209A PIM Master

January 17, 2011

Analyzer MW8209AAnritsu introduces PIM Master™ model for UMTS band VIII and LTE band 8 networks. The MW8209A brings inherent advantages of PIM Master, including distance-to-PIM technology, to E-GSM 900 MHz band.

Read More

Anritsu ‘E’ Series Handheld Analyzers

January 17, 2011

MT8212E_Frontview100Anritsu Company introduces an on-screen coverage mapping option for its “E” Series Spectrum Master™, Site Master™ and Cell Master™ handheld analyzers. The option has been developed to help wireless service providers, public safety users, land mobile radio operators and government officials verify system coverage and perform spectrum clearing before installing new radio services.

Read More

Anritsu Company Expands Measurement Capability of W-CDMA Performance Test System

January 17, 2011

Anritsu Product Photo_c 100Anritsu Company introduces test functions for W-CDMA mobile terminal UMTS bands XI (1.5 GHz) and III (1.8 GHz) for its ME7873F Performance Test System. With the expanded test capability, the ME7873F now offers mobile terminal carriers and manufacturers a comprehensive and simple test platform that supports all UMTS bands for testing the RF performance of user equipment.

Read More

Bluetooth Audio Test Set

January 17, 2011

8030_RS218Anritsu Co. introduces the MT8855A, an integrated test set capable of measuring the new generation of products using the Bluetooth Advanced Audio Distribution Profile (A2DP), headset profile and hands-free profile. Providing frequency coverage of 20 Hz to 20 kHz, the MT8855A offers lower cost-of-test and significantly reduced development time.

Read More

Enhanced MS271xB Family of Economy Microwave Spectrum Analyzers

January 17, 2011

Anritsu_Product_Photo_d_100Anritsu Company has enhanced its MS271xB family so that the economy microwave spectrum analyzers now provide specialized demodulation hardware and pre-written test routines for six popular wireless system configurations – Fixed and Mobile WiMAX, W-CDMA/HSDPA, cdmaOne, CDMA2000, EVDO, and GSM/GPRS/EDGE.

Read More

HSPA Functionality Introduced for Signaling Tester

January 17, 2011

AnritsuMD8470AsmallAnritsu Company introduces HSPA functionally for its MD8470A Signaling Tester that provides the MD8470A with best-in-class data rate analysis capability for HSPA applications. With the MX847010A-11 (HSDPA) and MX847010A-12 (HSUPA) options, the MD8470A is the only application test solution that can measure full HSPA data rates

Read More

MD8430A Signaling Tester

January 17, 2011

MD8430A_100Anritsu Company introduces the MD8430A Signaling Tester, the industry’s first LTE base station simulator. Providing flexible and responsive support for the latest 3GPP LTE standard, the MD8430A is a highly accurate cost-effective solution for manufacturers of LTE chipsets and mobile devices to evaluate their products and improve time to market.

Read More

ME7834 Mobile Device Test Platform

January 17, 2011

Anritsu100With companies looking for even greater efficiencies, the need to re-use not only hardware but software components is essential. Enormous investments in legacy systems cannot be disposed of so the ME7834 mobile device test platform provides the most flexible way to combine existing and new components.

Read More

MF6900A Fading Simulator

January 17, 2011

MF6900_100Cost-effective LTE fading simulator introduced by Anritsu Company. MF6900A is designed for use with MD8430A signaling tester and provides LTE terminal and chipset manufacturers with cost-efficient, accurate test solution.

Read More

MG3690C Series of Signal Generators

January 17, 2011

MG3697C_100Anritsu will showcase test instruments for design, production, and installation/maintenance. On display will be the MG3690C series of broadband signal generators that covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 325 GHz or beyond, with external multipliers

Read More

MG3700A Vector Signal Generator

January 17, 2011

MG3700A_100Anritsu Company introduces the first test solutions that support next-generation PHS (XGP: eXtended Global Platform) to help ensure the successful rollout of XGP in the marketplace. Three software packages have been developed for use with Anritsu’s MS269xA Signal Analyzers and MG3700A Vector Signal Generator.

Read More

MG37020A Fast-Switching Microwave Synthesizer

January 17, 2011

AnritsuMG37020ASAnritsu Company introduces the MG37020A fast-switching microwave signal generator that utilizes an advanced VCO-based hardware architecture to achieve best-in-class frequency switching speed of 100 µsec per point.

Read More

Microwave USB Power Sensors MA24108A / MA24118A

January 17, 2011

MA24108Asm_100Highly Accurate Microwave USB Power Sensors with Range to 18 GHz Introduced by Anritsu Company. MA24108A / MA24118A Provide Accurate Power Measurements up to 18 GHz over 60 dB Dynamic Range and are Well Suited for Commercial and Aerospace / Defense Applications.

Read More

MS202xB/MS203xB VNA Master™ Series

January 17, 2011

VNA_Master_B_family_1Anritsu Company introduces the MS202xB/MS203xB VNA Master™ series, the highest-performing handheld RF vector network analyzers (VNAs) in the industry. With frequency coverage from 500 kHz to 4/6 GHz, and featuring multi-instrument functionality in a rugged, lightweight design that can withstand harsh environments.

Read More

MS269xA Signal Analyzer Series

January 17, 2011

Anritsu_Product_Photo_b_100Anritsu Company introduces three software packages for its MS269xA Signal Analyzer Series. Taking full advantage of the MS269xA Series’ total level and modulation accuracy over the bandwidth from 50 Hz to 6 GHz, the MX269020A LTE Downlink Measurement Software, MX269021A LTE Uplink Measurement Software, and MX269908A LTE IQproducer™ help ensure compliance of LTE devices.

Read More

MS4640A VectorStar VNA

January 17, 2011

Anritsu_MS4647A_100The Anritsu MS4640A Vector Network Analyzer offers a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices, for R&D engineers pushing the last fraction of a dB out of their state-of-the-art designs, and for the manufacturing engineer trying to maximize throughput without sacrificing accuracy.

Read More

New Options for MS2712E/MS2713E Spectrum Master™

January 17, 2011

MS2712E_Spectrum_100P25 and NXDN measurement options for handheld spectrum analyzers introduced by Anritsu Company. Installers, maintainers, and certifiers of public safety and business communications systems have advanced test tool to ensure network operation.

Read More

Signal Analyzer: MS2830A

January 17, 2011

MS2830ASignalAnalyzerNew-generation, eco-friendly signal analyzer supporting high-level measurement speeds and performance at low cost to help raise R&D efficiency and productivity.

Read More

Signal Analyzers Software for MS269xA and MS2830A Series

January 17, 2011

MS2690A_Spectrogram100Anritsu Co. introduces software for its MS269xA and MS2830A series Signal Analyzers, as well as its MG3700A Vector Signal Generator to create single-instrument solutions that support the IEEE 802.11n/p/a/b/g/j wireless LAN (WLAN) standards.

Read More

Signaling Tester Software Option for MD8480C W-CDMA/GSM

January 17, 2011

MD8480C_100Anritsu Company introduces a software option for its MD8480C W-CDMA/GSM Signaling Tester that enables testing for the latest W-CDMA/GSM devices supporting simultaneous 64QAM and MIMO. This release builds on existing W-CDMA/HSPA support in the MD8480C.

Read More

Spectrum Master and BTS Master Handheld Analyzers

January 17, 2011

Anritsu100Anritsu Company announces it has enhanced the LTE measurement capabilities in its MS272xC Spectrum Master™ and MT822xB BTS Master™ series of handheld analyzers. With the new analysis tools added to the existing measurement capabilities, field engineers and technicians have handheld instruments that can conduct nearly all the measurements necessary to successfully deploy, commission, and maintain LTE networks.

Read More

Test Software for Emerging 3GPP LTE TDD Designs

January 17, 2011

Anritsu_MS2690A_100Anritsu Company, a global leader in LTE test solutions, introduces software packages for MG3700A and MS269xA Series Expand Anritsu LTE Test Offering; Anritsu Now Supports Both LTE Modes.

Read More

True-RMS USB Power Sensor Introduced

January 17, 2011

AnritsuMA24106A1smallAnritsu Company introduces the MA24106A, a highly accurate power sensor that measures True-RMS power, regardless of the input signal or its bandwidth, over 63 dB of dynamic range from 50 MHz to 6 GHz. Ideal for measuring average power of CW, multi-tone, and modulated RF waveforms, such as those used in 3G, 4G, and OFDM designs.

Read More

VNA Test Set MN469xB Series

January 17, 2011

Anritsu_MN469xB_100Anritsu Company announces it has extended the low-end frequency of its MN469xB VectorStar 4-port test sets, making the instruments the first microwave multiport Vector Network Analyzer (VNA) solutions to measure down to 70 kHz. The MN469xB series now combines DC coverage and the wide dynamic range time domain capability of a VNA.

Read More

VNAs MS2026B and MS2028B

January 17, 2011

Anritsu_MS2028Blg_100Anritsu Introduces High Performance Handheld 2-Port Vector Network Analyzers. New VNA Master Models Have Frequency Coverage from 5 kHz to 20 GHz with 750 µsec/pt Measurement Speed To Ensure Accurate 2-Port Measurements.

Read More

News

Anritsu introduces mobile interference hunting system

October 16, 2014

 Anritsu Co. introduces a revolutionary mobile interference hunting system that helps field engineers and technicians locate sources of interference more accurately, efficiently and economically. Integrating an easy-to-use interface, fast setup times and numerous features to effectively hunt a variety of signal types in multiple RF environments, the comprehensive solution provides wireless carriers, regulatory agencies, and broadcast and satellite operators with a tool that saves time and money. 

Read More

Anritsu's new field analyzer with integrated PIM & line sweep testing capability

September 30, 2014

 Anritsu Co. breaks new ground in field wireless test with the introduction of the MW82119B PIM Master™, which combines a 40 W, battery-operated PIM analyzer with a 2 MHz to 3 GHz cable and antenna analyzer, eliminating the need to carry multiple instruments to measure the RF performance of a cell site.  

Read More

Anritsu to demonstrate range of VNAs at EuMW 2014

September 24, 2014

 Anritsu will demonstrate two contrasting series of vector network analysers (VNAs) at its stand 107 at European Microwave Week 2014, October 7-9 in Rome, Italy. 

Read More

Anritsu leads market in eMBMS as GCF validations begin

July 15, 2014

 Anritsu, a global leader in wireless telecommunications test equipment, announces that it is the market’s leading supplier of the first industry approved protocol conformance test cases for mobile devices capable of receiving evolved Multimedia Broadcast Multicast Services (eMBMS) broadcasts.  

Read More

Anritsu Co. partners with Elliptika to create microwave teaching kit for engineering students

June 17, 2014

 Anritsu Co., a global leader in microwave and RF test solutions, announces a partnership with Elliptika to create Eductika, an original and innovative microwave teaching kit for students at colleges and universities. Anritsu's VNA Master™ series of handheld vector network analyzers is part of the complete turnkey solution that can be used by professors to teach the fundamentals of RF and microwave technologies. 

Read More

Anritsu's family of RF VNAs for variety of passive device testing environments

June 05, 2014

Anritsu Co. addresses the market need for value and performance when testing RF passive devices with the introduction of the ShockLine™ MS46522A 2-port RF VNA family with frequency coverage from 50 kHz to 8.5 GHz. The ShockLine MS46522A VNA is designed for testing passive devices such as cables, connectors, filters, and antennas in a wide variety of engineering, manufacturing and education applications.

Read More

Anritsu names Alexander Vice President and General Manager of Americas sales region

April 24, 2014

Anritsu announces the appointment of Pete Alexander, PhD as Vice President and General Manager of Anritsu Company, the United States subsidiary of Anritsu Corporation. Alexander, who has 25 years of experience in the test and measurement industry, will be responsible for all sales, marketing and field support operations for Anritsu's wireless, optical, microwave/RF, and digital test solutions in North America and Latin America.

Read More

China NIM selects Anritsu VectorStar™ broadband system

April 23, 2014

Anritsu Corporation Microwave Measurement Division (MMD) announces that the China National Institute of Metrology (NIM) Microwave Parameters Lab has selected the Anritsu VectorStar™ ME7838A 110 GHz broadband Vector Network Analyzer (VNA) system. The lab will use the advanced test solution to develop standards for on-wafer S-parameter calibration procedures.

Read More

Fraunhofer selects Anritsu 145 GHz vector network analyser system

April 14, 2014

The Fraunhofer Institute for high frequency physics and radar technology has decided to use the world's first 145 GHz broadband millimetre-wave test system, based upon the ME7838A system from Anritsu.

Read More

Vector Network Analyzer: VectorStar™ ME7838E

April 09, 2014

Anritsu_ME7838E_FrontAnritsu Co. introduces the VectorStar™ ME7838E vector network analyzer (VNA) broadband system that provides frequency coverage of 70 kHz to 110 GHz in a single connection. Incorporating all the benefits of the VectorStar ME7838 series broadband system the ME7838E addresses the challenges associated with today’s high-speed device characterization.

Read More

Anritsu introduces industry’s first IMS emergency services test capability

March 26, 2014

Anritsu Co. announces it has developed the wireless industry’s first PTCRB-approved protocol test case for IMS Emergency Services. This critical test case is now available on the ME7834L Protocol Conformance Test (PCT) and Carrier Acceptance Test (CAT) system. Anritsu recently became the only supplier of approved test cases for this increasingly relevant technology during the PVG#64 meeting held in Beijing.

Read More

Anritsu adds TETRA analysis and coverage mapping to LMR Master

March 19, 2014

Anritsu Co. introduces TETRA analyzer and TETRA coverage mapping options to its industry-leading LMR Master™ S412E handheld analyzer. Combining the LMR Master’s best-in-class performance and compact durable design with the new TETRA measuring and analysis tools makes the handheld analyzer the most comprehensive test solution for deploying, installing, and maintaining public safety, transportation, utility and critical communication networks.

Read More

Anritsu spectrum analyzer/signal analyzer now compatible with satellite carrier monitoring system from SAT Corp.

March 04, 2014

Anritsu Co. announces its MS2830A Spectrum Analyzer/Signal Analyzer is now compatible with the Monics satellite carrier monitoring system from SAT Corp. (SAT), a subsidiary of Kratos Defense & Security Solutions, Inc. A new driver enables the MS2830A, which combines high speed and performance in a cost- and energy-efficient design, to be integrated into the Monics enterprise networked carrier monitoring system used by government agencies, satellite operators, satellite service providers, and telecommunications companies. 

Read More

Handheld Spectrum Analyzer: MS2720T

February 27, 2014

MS2720T Spectrum Master

Anritsu's internal atomic clock option for its MS2720T Spectrum Master handheld spectrum analyzer allows users to acquire excellent frequency accuracy, including in environments in which the GPS cannot be used. Integrating the atomic clock inside the MS2720T provides field engineers and technicians with a durable, handheld spectrum analyzer that can deliver the extremely high accuracy necessary to prove regulatory compliance.

Read More

7Layers upgrades Anritsu ME7873L RF/RRM conformance test system with CA and RRM test capabilities

February 24, 2014

7Layers and Anritsu Co. announce that 7Layers has upgraded its ME7873L RF/RRM conformance test system with Rel. 8, Rel. 9, and Rel. 10 Radio Resource Management (RRM), as well as carrier aggregation (CA) test capabilities. This upgrade significantly expands the 7Layers test portfolio, including RRM capabilities for conformance test (CT), carrier-specific RRM capabilities for carrier acceptance test (CAT), and Anritsu’s market-leading capabilities for LTE Advanced CA.

Read More

ME7873L RF/RRM Conformance Test System

February 11, 2014

ME7873L_FrontAnritsu Co. announces that its ME7873L RF/RRM Conformance Test System has achieved the world’s first test platform approval criteria (TPAC) for LTE-advanced carrier aggregation (CA). This industry-leading achievement in the Global Certification Forum (GCF) enables wireless device manufacturers to implement certification of devices employing this new technology. 

Read More

Anritsu introduces world’s first 40 GHz handheld cable and antenna analyzer

January 31, 2014

Anritsu Co. introduces the Microwave Site Master S820E, the world’s first handheld cable and antenna analyzer with frequency coverage up to 40 GHz, which continues Anritsu’s leadership position in the handheld analyzer market it established with the first broadband Site Master over 15 years ago.

Read More

Technical and educational sessions addressing high-speed signal integrity challenges to be conducted by Anritsu at DesignCon 2014

January 24, 2014

Anritsu Co. (DesignCon booth #501), a world leader in high-speed signal integrity test solutions, will present a series of technical and educational sessions during DesignCon to help engineers solve the measurement challenges associated with designing high-speed semiconductors, and communications systems and devices. Additionally, technical demonstrations will be held in the Anritsu booth throughout DesignCon, which is scheduled for January 28-31 in the Santa Clara Convention Center, Santa Clara, CA.

Read More

Anritsu is #1 for NTT DoCoMo-approved test equipment for 2nd year

January 08, 2014

Anritsu Co. announces that it has validated 100 percent of the tests required by NTT DoCoMo for the Summer 2014 model mobile phones using the flexible ME7834L Mobile Device Test Platform. Achievement of this level of validation uniquely positions the ME7834L as the only test system with the ability to offer complete coverage for DoCoMo requirements, building on Anritsu’s #1 positions for Summer 2013 and Winter 2013 test requirements.

Read More

Anritsu, Qualcomm demo LTE-A Cat 6 peak data rates of 300 Mbps

January 06, 2014

Anritsu Co. announces it has worked with Qualcomm Technologies Inc. a wholly owned subsidiary of Qualcomm Inc., to successfully demonstrate peak throughput for a Category 6 LTE device and network simulator using 20+20 MHz carrier aggregation (CA). The two companies have jointly performed tests with a device based on the new Qualcomm® Gobi™ 9x35 modem, the world’s first LTE Advanced World Mode Category 6 chipset solution.

Read More

Anritsu teams with Wild River Technology to develop signal integrity test solutions

December 23, 2013

Anritsu Co. announces a working cooperation with Wild River Technology. The two companies are collaborating to provide test solutions that meet the rigorous test requirements associated with high-speed serial data interconnects, SERDES testing, cables, and backplanes used in NGNs.

Read More

Anritsu extends LTE-Advanced carrier aggregation conformance test leadership

November 07, 2013

Anritsu Co. announces its market-leading ME7873L RF/RRM Conformance Test System and ME7834L Mobile Device Test Platform have received the most test case validations across a single platform type for LTE-Advanced Carrier Aggregation (CA). This breakthrough further affirms Anritsu’s commitment to provide solutions for certification testing of mobile devices that implement CA, one of the key LTE-Advanced features defined in 3GPP Release 10.

Read More

Anritsu extends 4Tap emphasis to 32 Gbit/s for high-speed interconnect design evaluation

November 04, 2013

Anritsu Co. introduces a 32 Gbit/s extension option for its MP1825B 4Tap Emphasis that features industry leading Tr/Tf speeds and low jitter for up to four taps, allowing it to create emphasis that matches every industry standard. The MP1825B with the new option can be configured with the Anritsu MP1800A BERT signal quality analyzer to accurately measure the performance of high-speed interconnects used in Next Generation Network (NGN) applications in a cost- and time-efficient manner.

Read More

Anritsu intros PIM Master options for key LTE and UMTS bands testing

October 18, 2013

Anritsu Co. introduces three frequency options for its industry-leading PIM Master MW82119A Passive Intermodulation (PIM) high-power, battery-operated, portable PIM test analyzer. The new options provide wireless field engineers and technicians with the first battery-operated handheld analyzers that can accurately conduct “top of the tower” PIM measurements in the LTE 800 MHz and UMTS 2100 MHz bands, in addition to the LTE 2600 MHz band.

Read More

Anritsu PIM Master earns innovation award from Frost & Sullivan

October 10, 2013

Anritsu Co. announces that its PIM Master MW82119A has earned the Frost & Sullivan 2013 Global New Product Innovation Award for PIM Test Equipment. In presenting Anritsu with the award, Frost & Sullivan stated, “the PIM Master MW82119A demonstrates Anritsu’s commitment towards delivering higher value to users of portable PIM test equipment while addressing evolving technological trends in the PIM testing market.”

Read More

Anritsu at EuMW 2013 – Continuing innovation in test methods and equipment technology

September 24, 2013

Anritsu Co. will be showcasing a wide range of industry leading Test & Measurement solutions at the European Microwave Week 2013, to be held in Nuremburg 8th to 10th October. The newly released MS4640B series of VectorStar vector network analyzers (VNAs) will be on display, together with the MS2830A Spectrum and Signal Analyzers, a range of signal generators, and the handheld RF analyzers, all of which demonstrate different areas of technical leadership.

Read More

Anritsu introduces BTS Master with improved performance in a thinner and lighter design

September 16, 2013

Anritsu Co. introduces the MT8220T BTS Master, a multi-function handheld durable tester with all the capabilities network operators, sub-contractors, installers, and regulatory authorities need when measuring base stations. It is the third generation of Anritsu’s field-proven BTS Master family.

Read More

Anritsu LTE network simulator provides world’s first support for TD-LTE carrier aggregation

September 11, 2013

Anritsu Co. introduces software enhancements to its MD8430A Signaling Tester that make it the first LTE network simulator to support Time Division Duplex LTE (TD-LTE) Carrier Aggregation (CA) test functionality. The MD8430A is the industry’s leading platform for device testing from development to certification and carrier acceptance.

Read More

Anritsu introduces cutting-edge pulse measurement and true mode stimulus capabilities with VectorStar series

August 21, 2013

Anritsu Co. expands its VectorStar family of Vector Network Analyzers (VNAs) with the introduction of the MS4640B series.

Read More

Remote control capability for industry-leading handheld instruments introduced by Anritsu

July 26, 2013

Anritsu Co. introduces Wireless Remote Tools for its touchscreen PIM Master™, Site Master™, Spectrum Master™, and VNA Master™ handheld instruments. With the software installed, field technicians and engineers can remotely view screens and control the industry-leading field instruments using a Windows™-based laptop, PC or tablet, simplifying the deployment, installation, and maintenance of 2G/3G/4G wireless networks.

Read More

Anritsu makes first LTE-Advanced protocol conformance test verification submissions

June 26, 2013

Anritsu Corp. announces its first LTE-Advanced (LTE-A) Carrier Aggregation (CA) test case submissions to RAN 5, demonstrating a strength in protocol conformance that extends across current 2G, 3G, and leading-edge LTE technology. This follows its recent world first in validating RF conformance test cases for CA in PTCRB.  RAN 5 verification paves the way for protocol test validations and the inclusion of this technology in GCF and PTCRB certification.

Read More

Anritsu RTD software supports multimode TD-SCDMA/TD-LTE

June 18, 2013

Anritsu introduces TD-SCDMA signaling test capability for its industry-leading RTD solution. The new software enables chipset and mobile device makers to test their implementation of the 3G mobile communications standard used by China Mobile®.

Read More

Anritsu to showcase test solutions that address high-frequency designs at IMS 2013

June 02, 2013

Anritsu Co. (booth #938) will display test solutions to meet the high-frequency testing requirements of engineers in the aerospace and defense, communications, and semiconductor industries at IMS 2013 in Seattle, June 4-6. Featured will be the VectorStar Vector Network Analyzer (VNA) platform, which is an ideal solution for device characterization, as well as solutions for measuring components and subsystems used in radar, high-speed serial, microwave backhaul, wireless network, and other applications.  

Read More

Anritsu Spectrum Master certified for NRSE AM/FM broadcast measurements requirements

May 13, 2013

Anritsu Co. announces its MS2720T Spectrum Master™ handheld spectrum analyzer with option 709 has been self-certified to comply with the National Radio Systems Committee requirements for conducting AM and FM measurements. 

Read More

3 Anritsu test solutions nominated for CTIA E-Tech Awards

May 03, 2013

Anritsu Co. announces its MD8475A Signaling Testing, MG3710A Vector Signal Generator, and PIM Master MW82119A have been nominated for the 2013 CTIA Emerging Technology (E-Tech) Awards, which celebrate and promote the most innovative wireless products and services in the consumer, enterprise, application, and network technology segments.

Read More

Anritsu introduces multi-band receivers to expand drive test offering

April 03, 2013

Anritsu Co. introduces multi-band receivers for its Link Master drive test tools that offer field engineers, technicians and consultants a complete drive test system for locating interference and ensuring optimum wireless network operation.

Read More

Handheld direction finding system for ‘Master’ analyzers introduced by Anritsu

March 27, 2013

Anritsu Co. introduces the MA2700A InterferenceHunter handheld direction finding system that enhances interference mapping and simplifies locating interference sources in wireless networks. Designed for use with Anritsu’s BTS Master™, Cell Master™, Site Master™ and Spectrum Master™ handheld analyzers, the MA2700A InterferenceHunter can be used by field engineers and technicians during deployment, installation, and maintenance of wireless networks. It is ideally suited for use in spectrum clearing and interference mitigation.

Read More

Anritsu launches Toughest Site Competition 2013

March 14, 2013

Anritsu Co. announces the Toughest Site Competition 2013 that recognizes the challenges faced every day by field engineers and technicians responsible for deploying, installing, and maintaining wireless networks. The contest, which runs until June 30, 2013, highlights how field professionals overcome harsh weather conditions, extreme environments, and technical challenges to ensure the operation of private and commercial wireless networks.

Read More

Anritsu to showcase test solutions for LTE, narrowband, P25, and more at IWCE

March 08, 2013

Anritsu Co. will be exhibiting the new P25 Phase 2 TDMA analysis capability of its S412E LMR Master, as part of its portfolio of test solutions to address the key technologies associated with public safety networks – including LTE, narrowband and P25 – during IWCE 2013 in Las Vegas, March 11-15.

Read More

Anritsu announces remote control capability for portable PIM test analyzer

February 26, 2013

Anritsu Co. introduces Windows-based remote control software for its PIM Master MW82119A, the industry’s first high-power, battery-operated, portable PIM test analyzer. With the software, field technicians on the ground can control an MW82119A configured on top of the tower, making it easier and more efficient to conduct highly accurate PIM measurements, especially for difficult-to-access sites, such as Remote Radio Head (RRH) installations.

Read More

Anritsu to showcase leading handheld test solutions at NATE 2013

February 19, 2013

Anritsu Co. will be publicly demonstrating its new MW82119A PIM Master for the first time at NATE 2013 in Fort Worth, TX, February 18-21. In addition to the MW82119A, which is the industry’s first high-power, battery-operated, portable PIM test analyzer, Anritsu will be displaying its Site Master™ handheld cable and antenna analyzers, and Network Master™ MT9090 optical test platform in its NATE booth (#100).

Read More

Anritsu expands VNA Master family to 15 GHz

February 13, 2013

MS2037C Anritsu Co. introduces the MS2027C and MS2037C, two new members of its VNA Master handheld vector network analyzer series that bring the inherent advantages of VNA Master to 15 GHz frequency applications. 

Read More

AT4 wireless invests in Anritsu 3G/LTE test equipment

February 12, 2013

AT4 wireless and Anritsu Co. announce an agreement to bring Anritsu test equipment for 3G and LTE conformance and carrier testing to the AT4 wireless leading network of testing laboratories.

Read More

Anritsu LTE protocol conformance tester first solution to exceed 10,000 test cases

February 08, 2013

Anritsu Corp. announces it is the first test equipment manufacturer to exceed 10,000 validated protocol conformance test cases across all Work Items and frequency bands for LTE and LTE Inter-RAT. The milestone, achieved at the recent GCF CAG#33 meeting in Farnborough, UK, was accomplished on the ME7834 Mobile Device Test Platform.

Read More

Wavefront and Anritsu to offer the first LTE/WCDMA pre-screen testing in Canada

January 28, 2013

Wavefront, Canada’s Centre of Excellence for wireless commercialization and research, and Anritsu Electronics Ltd., a leader in wireless test solutions, announce they have formed a partnership expected to lower the costs and increase the availability of long term evolution (LTE) development and testing in Canada for small and medium enterprise (SME) level businesses, device manufacturers, and mobile virtual network operators (MVNO). 

Read More

Tech Mahindra acquires Anritsu ME7834L Mobile Device Test Platform

January 03, 2013

Anritsu Co. announces that Tech Mahindra has purchased the Anritsu ME7834L Mobile Device Test Platform (MDTP) to expand the LTE Conformance Test (CT) and Carrier Acceptance Test (CAT) capabilities provided by Tech Mahindra. The ME7834L enables the growing LTE device ecosystem with an additional source of test and certification services at Tech Mahindra’s lab, conveniently located in the New Jersey area.

Read More

Anritsu introduces handheld spectrum analyzers with unprecedented performance up to 43 GHz

December 20, 2012

The MS2720T features a touchscreen, full-band tracking generators to 20 GHz, and best-in-class performance for dynamic range, DANL, phase noise, and sweep speed, providing unprecedented levels of spectrum monitoring, hidden signal detection, RF/microwave measurements, and testing of microwave backhauls and cellular signals.

Read More

Anritsu introduces LTE-Advanced and IEEE802.11ac software for signal analyzer and vector signal generator Families

December 18, 2012

Anritsu Co. introduces three software packages supporting LTE-Advanced and five packages supporting IEEE802.11ac that extend the analysis capability of its MS269xA/MS2830A signal analyzers and MG3710A/MG3700A vector signal generators. With the software installed in the instruments, developers and manufacturers of LTE-Advanced UEs and components, as well as wireless LAN (WLAN) modules and devices have accurate solutions to verify performance, speed time-to-market, and lower cost-of-test.

Read More

Anritsu introduces analog signal generator for narrowband applications

December 04, 2012

Anritsu Co. introduces the MG3740A analog signal generator that outputs AM/FM/ΦM test signals for evaluation of narrowband analog radio equipment used in public safety networks and private commercial networks. 

Read More

Anritsu adds supplementary service capability to comprehensive VoLTE test offerings in signaling tester

November 15, 2012

Anritsu Co. introduces Voice over LTE (VoLTE) supplementary service test capability for its MD8475A Signaling Tester that includes the ability to confirm operation of services, such as call forwarding and call waiting, under a variety of network conditions. Introduction of these options extends the MD8475A’s VoLTE test capability and builds on the Signaling Tester’s integrated functionality to simulate LTE and IP Multimedia Subsystem (IMS) networks as well as an IMS client, providing a comprehensive test environment for UE manufacturers to verify device functionality.

Read More

Anritsu Corp. opens India subsidiary

November 08, 2012

Anritsu Corp., a global provider of innovative communications test and measurement solutions for more than 110 years, announces the opening of a 100 percent India subsidiary in Bangalore. The new office brings together marketing, sales, engineering, services, and support. By co-locating all the departments, the company expects to accelerate the rate of delivery of new products and provide better and broader support to its growing customer base in India. Anritsu also plans to start a branch office operation in Noida within this fiscal year.

Read More

Anritsu sponsors 3rd annual disaster management initiative at CMUSV

November 06, 2012

Anritsu Co. announces it was a sponsor of the third annual Disaster Management Initiative (DMI), held at Carnegie Mellon University, Silicon Valley (CMUSV) on November 4-5 at the university’s campus in Moffett Field, CA, in the heart of Silicon Valley. As part of the sponsorship, David Witkowski, senior product manager, Anritsu, led a session that focused on digital radio technologies for public safety, government, and infrastructure users.

Read More

Anritsu introduces LTE advanced carrier aggregation software

September 21, 2012

Anritsu MD8430AAnritsu Co. announces the industry’s first call-based LTE Advanced Carrier Aggregation testing capability that can be integrated into its MD8430A LTE Signaling Tester. The software-only upgrade leverages the four available RFs in the MD8430A, and provides 300 MB/s downlink throughput using two 2x2 MIMO Component Carriers (CCs). 

Read More

Anritsu enables public safety community with portfolio of Band 14 LTE device test solutions

August 24, 2012

Anritsu Co. announces that its full portfolio of LTE device test solutions includes Band 14 capability to support the public safety community. This portfolio includes three LTE-capable test platforms, as well as two LTE-focused test systems. Applications for these solutions cover the complete LTE device development chain from functional test to PTCRB certification and aftermarket repair, and options for advanced functionality, such as Voice over LTE (VoLTE) and LTE Advanced/Carrier Aggregation, are available.

Read More

Anritsu Co. introduces LTE FDD Band 22 and LTE TDD Band 42/43 test software for radio com. analyzer

August 08, 2012

Anritsu Co. introduces software options for its MT8820C radio communication analyzer that allows the one-box tester to perform testing of LTE FDD Band 22 and LTE TDD Band 42/43 LTE smartphones and mobile terminals. The extended functionality enhances the capability of the MT8820C, which can be used to test all mobile communications technologies, and allows the inherent cost and time efficiencies associated with the MT8820C to be realized in the development of LTE FDD Band 22 and LTE TDD Band 42/43 LTE phones and devices.

Read More

Samsung demos broadcast services over LTE using Anritsu’s RTD and MD8430A

August 06, 2012

Samsung Electronics Co. Ltd., a global leader in digital media and digital convergence technologies, has successfully demonstrated clear reception capabilities of LTE Broadcast services using evolved Multimedia Broadcast Multicast Service (eMBMS) technology using Anritsu’s Rapid Test Designer (RTD) and MD8430A to simulate the LTE network environment.

Read More

Anritsu Company Introduces Burst Detect Mode

July 30, 2012

Anritsu Co. introduces a burst detection enhancement for its MS272xC Spectrum Master handheld spectrum analyzer that makes it easier for field engineers and technicians to find narrow signals that may cause interference and adversely affect the performance of wireless networks. The Burst Detect mode extends the industry-leading performance of the MS272xC Spectrum Master analyzers, which feature the industry’s first 32 GHz and 43 GHz models, giving users powerful test tools for their field requirements.

Read More

Linear Technology introduces surge stopper with ideal diode

July 23, 2012

Linear Technology Corp. introduces the LTC4364, a surge stopper with ideal diode, providing compact and low-loss protection for 4V to 80V electronics in automotive, avionics and industrial systems. The surge stopper shields downstream electronics from input overvoltages and overcurrent, enabling continuous operation through transient surges. Overcurrent limiting protects the system and supply from short-circuits at the load.

Read More

Anritsu enhances E series Site Master and Cell Master handheld analyzers

July 23, 2012

Anritsu EasyTest ToolsAnritsu Co. announced it has enhanced its “E” series Site Master and Cell Master handheld analyzers with the introduction of easyTest Tools aimed at helping engineers and field technicians create, deliver, and display cable and antenna analyzer work instructions.

Read More

Anritsu introduces tracking generator with CW generator

July 12, 2012

Anritsu Spectrum Master MS2711EAnritsu Co. introduced a tracking generator for its Spectrum Master™ MS2711E, MS2712E, and MS2713E models that enhances the overall performance of the handheld analyzers, while making it easier and faster for field technicians to conduct additional measurements.

Read More

Anritsu enables device testing using MD8475A signaling tester with integrated IMS

June 19, 2012
Anritsu Co. announces the availability of integrated IP Multimedia Subsystem (IMS) functionality for its MD8475A Signaling Tester. Adding this LTE functionality extends the capabilities of the MD8475A’s SmartStudio graphical network simulation environment to include Call Session Control Function (CSCF), Dynamic Host Configuration Protocol (DHCP), and Domain Name System (DNS) servers, using either IPv4, IPv6, or dual-stack addressing. Read More

Anritsu to demo broadband VNA system from 70 kHz to 140 GHz at IMS 2012

June 15, 2012

Anritsu Co. announces it will demonstrate the world’s only broadband Vector Network Analyzer (VNA) system that can conduct single sweeps from 70 kHz to 140 GHz in its booth (#807) at the International Microwave Symposium (IMS), to be held June 19-21, in Montreal. The on-wafer device characterization is one in a series of demonstrations to be conducted in Anritsu’s booth that will highlight test solutions for high-frequency designs, including E-band applications and high-speed signal integrity measurements.

Read More

Anritsu introduces tracking generator with CW generator

May 15, 2012

Anritsu GeneratorAnritsu Co. introduces a tracking generator for its Spectrum Master™ MS2711E, MS2712E, and MS2713E models that enhances the overall performance of the handheld analyzers.

Read More

Anritsu VectorStar used by Modelithics to validate performance broadband diode models

March 30, 2012

Anritsu Co. announces that its VectorStar Broadband ME7838A vector network analyzer (VNA) system was used by Modelithics Inc. to validate the performance of its novel nonlinear diode models for W-Band Single Anode and W-Band ZBD flip chip schottky diodes from Virginia Diodes Inc. (VDI).

Read More

Anritsu VectorStar used by Modelithics to validate performance of broadband diode models

March 28, 2012

Anritsu Co. announces that its VectorStar Broadband ME7838A vector network analyzer (VNA) system was used by Modelithics Inc. to validate the performance of its flip chip schottky diode model for the W Band Single Anode and W Band ZBD schottky diodes from Virginia Diodes (VDI) Inc.

Read More

Anritsu Co. enhances signal analyzers

March 27, 2012

Anritsu Co. introduces options for its MS269xA series that enhance the wideband FFT analysis of the signal analyzers. By expanding the measurement capability of the MS269xA series with the hardware options, Anritsu strengthens its position as a world leader in test solutions for microwave and next-generation mobile networks by providing a highly accurate analysis tool that can capture wideband signals used in satellite and radar systems, as well as in LTE Advanced designs.

Read More

Anritsu enters into licensing agreement with Qualcomm

March 21, 2012

Anritsu announces that it has entered into a Factory Test Technology Licensing Agreement with Qualcomm Inc. for Qualcomm’s factory test solutions.

Read More

Anritsu PIM Master available to rent from Microlease in Europe

March 12, 2012

Microlease has become the first test equipment specialist to offer the newly-released Anritsu MW8209A PIM Master as a rental option. The analyser covers the 900 MHz band and is designed to address the growing requirement for the measurement of PIM in E-GSM networks, including UMTS Band VIII and LTE Band 8.

Read More

Articles

Anritsu extends leadership position in protocol conformance test

May 15, 2014

Anritsu Co. announced that the Global Certification Forum (GCF) recently confirmed at the CAG#38 meeting in Taipei that the Anritsu ME7834L Protocol Conformance Test (PCT) system has achieved the highest number of approved IMS test cases for device certification.

Read More

Monitor RF Power Anywhere in the World

April 15, 2012

Anritsu offers a comprehensive range of RF/microwave power meters and sensors covering 100 kHz to 65 GHz.

Read More

40 W PIM Analyzer Provides More Accurate Analysis

January 15, 2012

Introduction to Anritsu’s newest analyzer designed to support the 900 MHz band while addressing the growing need to measure PIM in E-GSM networks

Read More

PIM Testing Growing in Importance as 4G Rolls Out in Europe

October 07, 2011
European cellular system performance requirements are at an all-time high. System performance is an extremely important part of the day-to-day operation of a modern telecommunications network and is a direct reflection on the overall perceived quality levels experienced by each individual subscriber. Dropped calls, poor quality connections and other... Read More

Events

Webinars

Where Does the RF Compound Semiconductor Industry Go from Here?

9/30/14

Anritsu
Market Research Webinar Series

Read More

Webinars

A Guide to the Design of Laminate PCBs at Microwave Frequencies

5/22/14

Anritsu
Technical Education Webinar Series

Read More

Downloads

Eliminating the Tradeoffs and Limitations of Your Pulse Measurement Test Solution

Next generation radar systems face multiple difficult demands. The pace and variety of new requirements need multi-use/function/mode adaptive radars, to be used for different applications. This whitepaper reviews existing pulse measurement test methods; discusses advantages/limitations; and introduces new test method that takes advantage of high-speed digitizing architecture, offering the industryâ??s highest resolution/timing accuracy level.

Download

Calculating VNA Measurement Accuracy

Vector Network Analyzers (VNA) are your primary resource when analyzing and characterizing systems and components for RF and Microwave measurements. They are regarded as accurate measuring instruments, however, quantifying the accuracy performance of a VNA in a specific application can be challenging. VNA specifications are a starting point; but, they are based upon very specific calibration and measurement conditions, which are not applicable for many applications.

Download

Understanding VNA Calibration

In this guide, the concept of calibration is presented and discussed in detail. Specific topics to be covered include how to configure the VNA for calibration, types of calibration and calibration kits. A minimal amount of calibration mathematics and theory will also be covered.

Download

Advanced VNA Cable Measurements

This field brief will discuss phase-matching cables, S-parameter definitions as they apply to cable characterization and other cable parameters such as Phase Shift and Group Delay. Advanced Time-Domain measurements will also be presented as enhancements to the well-known Distance-to-Fault (DTF) techniques. In addition, diagnostic tools like the Smith Chart will be briefly described.

Download

Modern VNA Solutions Improve On-wafer Measurement Efficiency

In this white paper we look at the impact of calibration downtime during on-wafer testing and discuss how recent advances enable longer time periods between calibrations.

Download

Optimizing Your Millimeter-Wave Test Capability

Testing at millimeter-wave frequencies brings new and different measurement challenges, so minimizing measurement uncertainty is critical in the development of these new technologies. This white paper discusses the challenges associated with millimeter-wave testing and how to optimize your Vector Network Analyzer (VNA) measurement capability to provide the confidence required to make performance/cost tradeoffs.

Download

Superposition vs. True Balanced: What's Required for Your Signal Integrity Application

The True Balanced/Differential technique uses two sources to create actual differential and common-mode stimuli, hence the shortened name true-balance. This white paper offers guidance to signal integrity designers on the differences between these approaches and which one may best fit their need.

Download

Making successful, confident NF measurements on Amplifiers

The Anritsu VectorStars Noise Figure Option 041 enables the capability to measure noise figure (NF), which is the degradation of the signal-to-noise ratio caused by components in a signal chain. The NF measurement is based on a cold source technique for improved accuracy. Various levels of match and fixture correction are available for additional enhancement. VectorStar is the only VNA platform offering a Noise Figure option enabling NF measurements from 70 kHz to 125 GHz. It is also the only VNA platform available with an optimized noise receiver for measurements from 30 to 125 GHz.

Download

Noise Figure Measurements

The Anritsu VectorStar’s Noise Figure – Option 041 enables the capability to measure noise figure (NF), which is the degradation of the signal-to-noise ratio caused by components in a signal chain. The NF measurement is based on a cold source technique for improved accuracy.

Download

Higher Data Rates Require New De-embedding Techniques

Higher data rates can create challenges for traditional de-embedding techniques. As frequencies approach 70 GHz or even 110 GHz, errors related to fixturing can be greater than those of the “device under test” or DUT.

Download

Low Noise Amplifier Testing Challenges

Designers, modelers, and manufacturers of RF and microwave frequency amplifiers used in applications such as radar, wireless communication, or high-speed digital communication systems at either the wafer-level or as a packaged part face many test challenges.

Download

Signal Integrity- Frequency Range Matters!

Accurate measurements are needed to better understand higher order harmonics, as will new challenges related to conductor skin effects and dielectric losses on PC boards, along with the design trade-offs related to choices of vias, stackups, and connector pins.

Download

Superposition vs. True Balanced: What's Required for Your Signal Integrity Application

Signal Integrity applications commonly utilize balanced/differential transmission lines which are typically characterized using vector network analyzers (VNA). There are two approaches to performing these measurements and the selection of the best method depends on what you need to measure.

Download

Introducing the Anritsu Tracking Generator and CW Generator

The Anritsu Option 20 tracking generator provides state of the art features not seen with other competitive hand-held analyzers. This includes capabilities such as 0.1 dB power step size, a wide dynamic range and a power output flatness of ±1 dB.

Download

Signal Integrity Measurement Challenges

The instantaneous traffic rates at internet data centers have reached 1 Tbit/s and device interconnects are becoming transmission bottlenecks. Assuring signal integrity at high data rates while minimizing cost requires closing the loop of simulation and measurement during the design stage.

Download

Overcoming High Speed Interconnect Challenges

Cloud computing, smart phones, and LTE services are causing a large increase in network traffic. The instantaneous traffic rates at internet data centers have reached 1 Tbit/s. To support this increased traffic, speed of IT equipment – such as those used in high-end services in data centers – must be increased.

Download

Your request will be e-mailed directly to the company who will follow up with the requested information. This request is for legitimate sales inquires only – please do not submit promotions, solicitations or spam.

Back to Listings

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement