MITEQ Inc.

MITEQ introduces a new high reliability fiber optic transmitter with an operating bandwidth to 6 GHz.  Transmitter Model number HRT-50K6G-28-20-M14 has a noise figure of 12 dB and is available in three different optical wavelengths (1550, 1490, 1310 nm).  The operating temperature range is -40 to +85° C.

MITEQ introduces a new addition to its family of wide band high-dynamic range amplifiers. AMF-4D-01000800-85-30P is a connectorized small outline high-dynamic range amplifier, covering multi-octave bandwidth from 1 to 8 GHz. The housing is 23mm (H) x 18mm (L) x 8mm (W) without the connectors and heat sink.

Model AMF-5B-33003500-80-32P is a connectorized high power amplifier/module, covering 33-35 GHz and delivering approximately 2.5 W of saturated power and 2 W of P1dB over a 2 GHz band.

MITEQ introduces a new addition to its family of broadband high-power amplifiers. AMF-4B-26003100-100-36P is a connectorized high-power amplifier/module, covering 26 to 31 GHz and delivering approximately 5 W of power.

MITEQ introduces a new addition to its family of broadband high power amplifiers. AMF-2B-08001800-80-40P is a connectorized high power amplifier, covering octave bandwidth from 8 to 18 GHz and delivering approximately 3 W of power and 2.5 W from 6 to 18 GHz.

MITEQ Inc. introduces a new addition to its family of LNAs. The Model AFS4-00101200-18-10P-4 is ultra low noise, lightweight and has a small profile and footprint. The Kovar housing is a hermetically sealed package. This unit has an ultra low noise figure of 1.8 dB maximum.

MITEQ Inc. introduces a new addition to its family of LNAs. The AFS4-00102650-35-10P-4 is very low noise, lightweight and has a small profile and footprint. The Kovar housing is a hermetically sealed package. This unit has a low noise figure of 3.5 dB.

MITEQ Inc. introduces a new addition, Model AMF-2F-00100200-16-15P, to its family of extremely low noise and ultra small coaxial LNAs in the 0.1 to 2 GHz band. This LNA has over 30 dB of gain in a housing that is only 1.22” long and 0.88” wide without the field-replaceable SMA connectors.

MITEQ introduces a family of broadband amplifiers that cover 4-8 GHz with minimum 36 dB gain, typical 34 dBm P1dB, 40 dBm output IP3, and a very low noise figure. The AMF-4B-04000800-50-33P is a balanced amplifier with excellent gain flatness to within ±1 dB typical over the full band.

MITEQ Inc. introduces a new addition to its family of wideband high power amplifiers. The AMF-5B-07900840-35-40P is a connectorized X-band high power amplifier/module, covering 7.9 to 8.4 GHz and delivering over 10 W at P1 dB.

MITEQ Inc. introduces a new addition to its extensive line of very low noise waveguide LNAs.  The AMFW-3F-12201270-10-15P is a half-height WR-75 integrated LNA designed for harsh environmental and extreme temperature conditions.  In addition, it is designed to be extremely small, lightweight and for low power dissipation, ideal for airborne and portable applications.

MITEQ’s Model AMFW-6F-18102120-120 is part of a new line of low profile, lightweight, small volume, and high dynamic range Ka-band very low noise amplifiers. <br><br>  The new SATCOM LNA family offers a unique combination of features and performance in an extremely small footprint.  Total weight is approximately 125 grams maximum, has a pressurizable waveguide at the input, and package profile is 104 mm x 22 mm x 34.5 mm.

MITEQ Inc. introduces Model AMFW-8F-17702130-150-P2-TC-WP, a very low noise, high dynamic range, temperature compensated, weatherproof Ka-band waveguide frontend operating at 17.7 to 21.3 GHz. Isolator protected at both the pressure sealed WR-42 waveguide input and K(F) connector output, the low-noise amplifier is lightweight with a small profile and footprint.

MITEQ introduces a new addition, Model AMFWW-5F-22502357-140-WR34, to its very low noise waveguide LNA family.  It has WR34 standard waveguide input and output, only 2” long and 0.75” high and wide, limited by the flange size solely.

A series of 6 to 8, 12 to 18 and 8 to 18 GHz amplifiers are introduced by MITEQ Inc., covering 30 dBm to 34 dBm. The Model AMF-8B-08001800-40-33P delivers over 33 dBm of power over full band of 8 to 18 GHz, with over 40 dB gain and ±2.5 dB flatness.

MITEQ Inc. introduces a new addition to its family of wideband high power amplifiers. The AMF-6B-14001535-50-40P is a connectorized Ku-band high power linear amplifier/module, covering 14 to 15.35 GHz and delivering over 10 W at P1 dB.

MITEQ recently released a new 40 page catalog of their complete Bipolar Amplifier line up to 3 GHz.  This catalog features low noise, medium power, wide band, MRI, cellular/PCN and INMARSAT bands.

MITEQ Inc. introduces a new addition, Model AMF-5F-18002200-17-10P, to its family of extremely low noise and ultra small coaxial LNAs in the 18 to 22 GHz band. This LNA has over 40 dB of gain in a housing that is only 8 mm high and 16 mm long without the field-replaceable K-connectors.

MITEQ’s new Model DA40218LC7, four-channel downconverter, integrates our standard broadband double-balanced mixer designs and IF amplifiers to provide a phase and amplitude tracked 4-channel downconverter with an integrated LO distribution network. This unit can be used for basic direction finding experiments with four antennas.

MITEQ introduces a new addition to its family of broadband high power amplifiers. Model AMF-8B-18002650-70-37P-PS is a self-cooled 3 RU rack-mount high power amplifier, covering 18 to 26.5 GHz and delivering a minimum of 5 W of power.

MITEQ’s cost-effective high performance LCN amplifier Series are now available in frequency ranges from 1-2, 2-4, 4-8, 8-12, 12-18, 6-18, 2-18 GHz.  These amplifiers offer excellent low noise figures and great single unit pricing starting at $325.00.

MITEQ Model AMF-2F-00020050-20-28P is a new addition to its family of low noise, wideband, and ultra-small coaxial LNAs in the 20 to 500 MHz band. This LNA has over 35 dB of gain in a housing that is only 1.22” long and 0.88” wide without the field-replaceable SMA connectors that are mounted on a removable heatsink. Gain flatness is a maximum of ±1.75 dB, though typical is ±1.0 dB.

MITEQ’s Model LNB4044N01T is part of a line of low-noise (less than 3.3 dB), high dynamic block downconverters.  The LNB4044N01T incorporates a fixed frequency phase-locked LO to convert the 40 to 44 GHz RF to a 1 to 5 GHz IF band.

MITEQ Inc. introduces Model AMF-4D-02002650-90-20P to its family of rugged, single bias ultra-broadband coaxial amplifiers. This amplifier has over 25 dB of gain from 2.0 to 26.5 GHz, in a housing that is only 1" long and 0.83" wide without the field replaceable 2.92 mm connectors.

MITEQ’s AMFG family of GaN power amplifiers covers frequency ranges more than ten octaves wide. High impedances of these devices allow for excellent port match and gain flatness over very wide bandwidths. Inherent robustness of the device technology enables these amplifiers to withstand very high base temperatures or surges in RF or DC power.

MITEQ is offering a new line of mixers designed specifically for Satellite applications. The TBS2731LW1 is ideally suited for converting from L-Band to Ka-Band or Ka-Band to L-Band. The mixer has superb conversion loss and VSWRs as well as excellent spurious response and outstanding LO isolations

The Model AMF-6B-08501070-80-33P-ISO delivers over 33 dBm of power over the band 8.5 to 10.7 GHz, with over 30 dB gain and ±0.75 dB flatness. P1 dB is over 34 dBm above 10 GHz. Noise figure is less than 8 dB, port VSWR is less than 1.5:1, and it draws about 1.4A from a single +12 to +15 V DC supply.

MITEQ has announced that the company’s president, Howard Hausman will deliver a 40 minute workshop at EDI CON 2013 titled, “Applications of Fiber Optic Links in RF and Microwave Systems” to the audience of RF, microwave and high speed digital designers attending this premier event in Beijing, China.

In April 2012 MITEQ achieved AS9100 registration, expanding our scope and commitment to include the Aviation, Space and Defense Industries. MITEQ is now registered to AS9100:2009 (Rev. C) as well as ISO9001:2008 by National Quality Assurance USA (NQA), an accredited registrar of the ANSI-ASQ National Accreditation Board (ANAB).