advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

API Technologies Weinschel

Company Profile

logo-weinschel_RGB

Contact Information

Phone: (301) 846-9222
Toll Free: 800-638-2048

Location

API Technologies Weinschel
5305 Spectrum Drive
Frederick MD 21703
United States

API Technologies’ Weinschel Brand Products include attenuators, terminations, power splitters / dividers, digital & programmable attenuators and switches, phase shifters, RF distribution subsystems and PLANAR CROWN® / BlindMate® connectors.

Products

Programmable Attenuator Units Series

June 23, 2015

API 8321_Front_RightWeinschel, an API Technologies company announces a series of programmable attenuator units that offer a streamlined approach in programmable attenuation for bench test and subsystem applications. Models 8320/8321, house and control various Weinschel programmable attenuator models (3200-XE, 3400, 150T, and 4200 Series) via front panel controls, Ethernet, USB 2.0 and Serial communications interfaces.

Read More

PIM Fixed Attenuators & Terminations

April 24, 2015

254_rightWeinschel's low PIM products offer a rugged construction low profile design free of solder joints that covers DC to 6.5 GHz, with power handling up to 175 W average and IM3 levels as low as -150 dBc output and -120 dBc reflected dependent on dB value. Model 254 is available in 10, 20, 30 and 40 dB. Other features include quality connectors with special high temperature support beads and choice of Type N or SMK (2.92 mm).

Read More

Digital Attenuators: 4205 Series

May 01, 2014

4205 Series

At the heart of the digital attenuation solution is a series of USB/TTL controlled MMIC digital attenuators and Ethernet controlled rack-mountable subsystems that are suitable for a multitude of RF and microwave applications up to 6 GHz. The USB/TTL controlled MMIC digital attenuators, Model 4205 Series, are available in three attenuation configurations.

Read More

Power Splitters & Dividers

March 06, 2014

Power Splitters & DividersWeinschel offers a comprehensive product line of power splitters and power dividers. Many of these standard products were designed for particularly demanding broadband requirements, SWR and high power system applications. They have a wide selection of connector types and offer frequency express shipment on select models.

Read More

40 GHz Coaxial Attenuators

January 17, 2011

AW40GHz-20W_AttnsmallThese Coaxial Attenuators operate over the dc-40 GHz and are capable of handling up to 2 W for Model 54A and 20 W average for Model 89 and up to 200 W peak. Model 54A is available in 3, 6, 10, 20, 30 dB while Model 89 is available in 10, 20 and 30 dB.

Read More

6 GHz Programmable Attenuators

January 17, 2011

34063408_smallWeinschel offers a series of 6 GHz relay switched programmable attenuators (Models 3406 & 3408) that are specifically designed for wireless/cellular, RF simulation/emulation & communication test applications. This series is available in many standard attenuation ranges and cell configurations (0 to 55 / 1 dB, 0 to 103/1 dB and 0 to 55.75 / 0.25 dB).

Read More

Broadband Mechanical Phase Shifters to 12 GHz

January 17, 2011

980980KWeinschel’s 980 series of mechanical phase shifters allow for nominally linear phase adjustments over the dc to 12 GHz frequency range (depending on model). Each unit contains a internal self-locking mechanism that eliminates the need for a locking nut which is ideal for phase trimming in densely packaged systems with minimum accessibility.

Read More

DC-26.5/40 GHz Manual Step Attenuators

January 17, 2011

Agilent_Product_68_100pxThis low cost design offers two new designs that operate from dc-26.5 GHz and dc-40 GHz. These designs are available in standard attenuation ranges of 0-9 dB in 1 dB steps (9012-9 & 9015-9) and 0-70 dB in 10 dB steps (9012-70).

Read More

MMIC Switched Digital Attenuator: Model 4201-63

January 17, 2011

MMICswitchedDigAttenWeinschel’s Model 4201-63 MMIC digital attenuator operates over the 0.4 to 6 GHz frequency range and provides an attenuation range from 0 to 63 dB in 1 dB increments. This attenuator has excellent repeatability and performance with built-in TTL interface.

Read More

New 6 GHz Programmable Attenuators

January 17, 2011

AW_3406_&_3408smallAeroflex / Weinschel offers a series of 6 GHz relay switched programmable attenuators that are specifically designed for wireless/cellular, RF simulation/emulation & communication test applications. Other features include choice of attenuation ranges and steps (0 to 55 / 1 dB, 0 to 103/1 dB and 0 to 55.75 / 0.25 dB).

Read More

New Phase Compensated Programmables to 2.5 GHz

January 17, 2011

AW4248smallWeinschel”s series of phase compensated GaAs switched solid-state programmable attenuators (Model 4246 & 4248) are specifically designed for wireless/cellular, RF simulation/ emulation & communication test applications. The incremental relative phase for these unit is ±5° between 0 and.25, 1, 2, 4, 8, 16 dB and ±10° between 0 and 32, 48 dB.

Read More

PLANAR CROWN® Universal Connector System

January 17, 2011

Planar-crowns_smThe Weinschel PLANAR CROWN® universal connector system incorporates design and application features that eliminate the technical, electrical and economical drawbacks of standard bulkhead connectors, connector savers, cable connectors and adapters.

Read More

SmartStep® Programmable Attenuators

January 17, 2011

3408T-103_100pxThis line of intelligent programmable step attenuators with a built-in digital interface are designed to simplify the control and integration of these devices into subsystem and bench applications. This series of programmable step attenuators is designed for use in automatic test equipment and OEM systems operating in the dc to 6 GHz frequency range. These models are available in many standard attenuation ranges and cell configurations.

Read More

Weinschel’s Microwave & RF

January 17, 2011

AW_Cover_2005smallThis catalog outlines Weinschel's wide range of RF, wireless, & microwave components and subsystems that operate over the dc to 40 GHz frequency range. Product lines include programmable step attenuators including PIN, FET, relay and edge-line technologies, and more.

Read More

WLAN System Simulator Model 8314-X

January 17, 2011

Simulator8314xThis specialized subsystem is used to simulate the connectivity between a mobile unit running along a line of 3 base stations spaced from 250 to 1000 meters apart. The test subsystem is able to simulate the variation of the RF signal from the base stations reaching the mobile when the mobile is moving at speeds of up to 250 km/h.

Read More

Articles

Decades of Innovation: Past, Present and Future

December 14, 2012

Aeroflex / Weinschel celebrates 60 years of operation – A historical look at the company

Read More

Digital Radio Test Set Addresses LTE Test Challenges

February 01, 2009

Aeroflex Digital Radio Test Set Addresses LTE Test Challenges

The Aeroflex 7100 Digital Radio Test Set is a test solution that has been developed to enable R&D engineers working on LTE terminal design to meet the challenges of the evolving standards.

Click here to find out more >>

Read More

Your request will be e-mailed directly to the company who will follow up with the requested information. This request is for legitimate sales inquires only – please do not submit promotions, solicitations or spam.

Back to Listings

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement