Company Profile

Contact Information

Phone: (973) 772-4242
Fax: (973) 772-4646

Location

Anatech Electronics
70 Outwater Lane
Garfield NJ 07026
United States

Articles

Products

LPH Series Harmonic Lowpass Filters

Harmonic Lowpass filters

Anatech Electronics LPH Series are 50 ohm high performance lowpass filters, with minimal insertion loss at the cutoff frequency (Fc) and relatively sharp transition to the rejection frequencies. They are designed to remove interference as well as harmonics. Their size ranges anywhere from 2.7" to 14.5" in length, including the connector. The LPH series can be used in a variety of platforms, such as test lab bench measurements and system harmonic reduction.


Read More

Cavity Duplexer: AD830-875D207

AD830-875D207

The AD830-875D207 cavity duplexer for GSM applications has a Band 1 passband of 825 to 835 MHz and Band 2 passband of 870 to 880 MHz. Insertion loss is less than 1.3 dB, ripple is less than 0.2 dB, isolation is 90 dB, rejection ranges from 25 to 90 dB, and return loss is greater than 20 dB.


Read More

Cavity Bandpass Filter: AB950B603

Anatech-LogoThe AB950B603 cavity bandpass filter has a center frequency of 950 MHz, passband of 940 to 960 MHz, insertion loss of 0.7 dB, return loss of 18 dB, and operating temperaturerange of -40o to +85o C. The filter will withstand shock of 20 G (11 ms) and vibration of 20 G, measures 6.6 x 3.5 x 1.5 in., and uses Type-N female connectors.


Read More

Ceramic Bandpass Filter: AM748B1188

Anatech-LogoThe AM748B1188 ceramic bandpass filter has a center frequency of 748 MHz, passband of 740 to 756 MHz, ripple of less than 0.7 dB, insertion loss of 2 dB, return loss greater than 14 dB, and rejection of at least 40 dB. It handles 2 W, has an operating temperature range of -20o to +70o C and measures 17 x 13 x 5.5 mm.


Read More

Highpass Filter: AE600H9800

Anatech-LogoThe AE600H9800 highpass filter has a cutoff frequency of 600 MHz and a passband of 2 to 10 GHz. Insertion loss at its center frequency is less than 2 dB, return loss is greater than 10 dB, rejection is at least 30 dB from DC to 932 MHz, and it is housed in a package measuring 1 x 0.7 5 x 0.243 in. The filter uses Type-N female connectors.


Read More

Ceramic Duplexer: AM836-881D177

AM836-881D177Anatech’s AM836-881D177 ceramic duplexer has a Band 1 passband of 824 to 849 MHz, a Band 2 passband of 869 to 894 MHz, and insertion loss in either band of less than 3.3 dB. Return loss is greater than 13 dB, isolation is greater than 43 dB in Band 1 and greater than 60 dB in Band 2, and rejection ranges between 43 dB and 50 dB.


Read More

Crystal Notch Filter: AS36CN803

Anatech-LogoThe AS36CN803 crystal notch filter has a center frequency of 36 MHz, low-side passband of -80 to -2 kHz, high-side passband of 2 to 80 kHz, insertion loss of 4 dB, ripple of 1 dB or less, and has a maximum input power of 10 dBm. The filter uses SMA female connectors.


Read More

Directional Coupler: AM1650DC834

AM1650DC834The  AM1650DC834 directional coupler operates over a frequency range of 800 to 2500 MHz with 15 dB of coupling (+/-1 dB), 20 dB of directivity, 0.4 dB insertion loss, at least 35 dB of isolation, and intermodulation distortion of -140 dBc. It has a VSWR of 1.2:1 and handles 40 W CW. The coupler operates over a temperature range of -30o to +60o C, has Type-N connectors, and measures 4.2 x 1.4 x 0.9 in.


Read More

AM1500PD902: Two-Way Power Divider

Anatech-LogoThe AM1500PD902 two-way power divider cover 800 to 2200 MHz with insertion loss of 0.5 dB, isolation of at least 18 dB, amplitude balance 0.5 dB, phase balance of 5 deg., and VSWR of 1.4:1. It will handle 100 W CW, uses Type-N female connectors, and measures 2.1 x 2.1 x 1 in.


Read More

AE70NS2067: Notch Filter

Anatech-Logo

The AE70NS2067 notch filter has a notch bandwidth of 68 MHz to 72 MHz, rejection of at least 30 dB, a low-side passband of DC to 64 MHz and high-side passband 76 to 150 MHz. Insertion loss is less than 1 dB, and the filter measures 4 x 1.25 x 0.75 in. and uses SMA female connectors.


Read More

AM1950-2140SD345 SAW Duplexer

Anatech LogoThe AM1950-2140SD345 SAW duplexer is designed for wireless applications and has very low ripple and insertion loss along with high rejection. Pass-band 1 is 1940 to 1960 MHz and pass-band 2 is 2130 to 2150 MHz. Rejection is up to 52 dB, insertion loss is less than 2.2 dB in either pass-band, in-band ripple is 0.6 dB, and isolation is at least 43 dB.


Read More

AD1950-2140D269 Cavity Duplexer

AD1950-2140D269The AD1950-2140D269 is a high-performance cavity duplexer designed for radar, satellite communications, and other S-band applications. Band 1 is 920 to 1980 MHz and Band 2 is 2110 to 2170 MHz. Maximum insertion loss is 1.5 dB, ripple is less than 0.2 dB, isolation is greater than 90 dB, rejection is at least 90 dB, power handling is 20 W, and return loss is greater than 18 dB.


Read More

AD800-900-1800TR288 Tri-Band Diplexer

Anatech LogoThe AD800-900-1800TR288 tri-band diplexer has a receive frequency range of 806 to 824 MHz, 896 to 901 MHz, and 1850 to 1910 MHz, and transmit frequency range of 851 to 869 MHz, 935 to 940 MHz, and 1930 to 1990 MHz. Its insertion loss is 2.5 dB or less, ripple is 1.8 dB, return loss is greater than 14 dB, and rejection is up to 45 dB.


Read More

Cavity Bandpass Filter: AB897B599

AB897B599The AB897B599 cavity bandpass filter has a pass-band of 890 to 905 MHz, low insertion loss of 0.75 dB, and high rejection of 70 dB from 935 to 955 MHz. Passband ripple is less than 0.2 dB and return loss is at least 18 dB. The filter measures 88 x 167.4 x 46 mm and uses SMA female connectors.


Read More

Surface-Mount Isolator: AM4400-5000IS103

Anatech LogoThe compact AM4400-5000IS103 surface-mount isolator has insertion loss of 0.4 dB or less, isolation of at least 20 dB, and handles forward power of 50 W average and 500 W peak and reverse power of 10 W average and 100 W peak. The isolator operates over a temperature range of -30o C to +80o C and measures 0.50 x 0.50 x 0.25 in.


Read More

Cavity Band-Pass Filter: AB772B1183

Anatech LogoThe narrowband AB772B1183 cavity band-pass filter is designed for use in public safety mobile radio systems. It has a center frequency of 772 MHz, pass-band of 769 to 775 MHz, insertion loss of 2 dB, rejection of 40 dB at 700 kHz from band edges, ripple of less than 0.2 dB, and return loss of at least 14 dB.


Read More

Cavity Diplexer: AD2535-2655D388

Anatech LogoThe AD2535-2655D388 cavity diplexer is an excellent choice for use in wireless applications. Band 1 frequency range is 2500 to 2570 MHz and Band 2 is 2620 to 2690 MHz, and insertion loss is less than 2 dB. Isolation is at least 90 dB, power handling is 50 W, and return loss is greater than 15 dB.


Read More

LC Highpass Filter: AE215H9780

Anatech LogoThe AE215H9780 LC high-pass filter has a cutoff frequency of 215 MHz and a pass band of 215 to 1000 MHz, making it well suited for a wide range of applications. It has insertion loss of less than 1 dB, rejection greater than 60 dB from DC to 100 MHz, uses SMA female connectors, and measures 2.5 X 1.1 X 0.75 in.


Read More

MHz Triplexer: AD900-1800-2700TR296

Anatech LogoThe AD900-1800-2700TR296 is a high-performance cavity triplexer designed for wireless applications in three standard wireless bands. It has rejection greater than 100 dB, power handling of 300 W, insertion loss of 0.35 dB, and return loss of 18 dB, measures only 237 x 131.6 x 55 mm, and uses Type-N female connectors.


Read More

Directional Coupler: AM10000DC881

Anatech LogoThe AM10000DC881 directional coupler operates over a broad frequency range of 2 to 18 GHz, making it an excellent choice for electronic warfare, test and measurement, and many other applications. It has coupling of 30 dB +/-1.4 dB, insertion loss of less than 0.5 dB, directivity of at least 12 dB, sensitivity of +/-1 dB, and power handling ability of 400 W average and 3 kW peak.


Read More

Cavity Bandpass Filters for 700 MHz LTE

lte700Our cavity bandpass filters for 700 MHz LTE are available for all uplink and downlink bands and meet the stringent requirements posed by dense channel spacing. They have more than 40 dB of rejection at 700 kHz from passband to stopband at band edges, low insertion loss, and PIM as low as -150 dBc.


Read More

LC Duplexers

LCduplexersAnatech’s standard LC duplexers combine insertion loss of 1 dB or less with isolation greater than 50 dB, return loss greater than 15 dB, and power handling ability up to 20 W.  Anatech LC duplexers are manufactured using inductors and capacitors with a high Q factor, which provides low insertion loss and high selectivity.


Read More

Dual Directional Coupler: AM1485DC854

Anatech LogoThe AM1485DC854 30-dB dual-directional coupler operates from 800 to 2170 MHz, handles 500 W average and 3 kW peak RF power input, and is well suited for base station RF power monitoring. It has very low third-order intermodulation distortion of -155 dBc, insertion loss of 0.5 dB, coupling flatness of 0.75 dB, directivity of at least 25 dB, and VSWR of 1.07:1.


Read More

2-Way Power Divider: AM1440PD881

Anatech LogoThe AM1440PD881 two-way power divider operates from 280 to 2500 MHz and has insertion loss of less than 2.5 dB, isolation of 30 dB, amplitude balance better than 0.2 dB, and phase balance of +/-2 deg. The power divider’s VSWR is 1.2:1 or less and power handling ability is 700 W average and 3 kW peak.


Read More

Lowpass Filter: AE800L8686

Anatech LogoThe AE800L8686 low-pass filter has a pass-band of DC to 800 MHz with insertion loss of less than 4 dB, ripple of 0.1 dB or less, and rejection at 1000 MHz of at least 40 dB. The filter measures 4 x 1.25 x 0.75 in. and has BNC female connectors.


Read More

3-Way Power Divider: AE5000PD882

Anatech Electronics introduces its 3-way Power divider AE5000PD882 ranging from 2 to 8 GHz, with insertion loss   1.2 dB, isolation = 18 dB, VSWR of 1.5:1 in a package size of 71 x 31 x 13 mm max. Anatech Electronics is also involved in the design and manufacturing of other low and high power 2,3,4,8 and 16 way power dividers ranging from 10 MHz to 8 GHz.


Read More

Directional Coupler: AM1650DC838

AM1650DC838Coupler100Anatech Electronics has introduced the AM1650DC838 directional coupler designed for wireless and general-purpose applications from 800 to 2500 MHz. The AM1650DC838 provides 6 dB of coupling with flatness of +/-1 dB from 800 to 2500 MHz, insertion loss of 1.5 dB or less, a VSWR of 1.2:1 or less, and 40 W power handling ability.


Read More
Back to Listings