advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

SAGE Millimeter Inc.

Company Profile

Sage Millimeter logo

Contact Information

Contact: Wendy Shu
Phone: 424-757-0168

Location

SAGE Millimeter Inc.
3043 Kashiwa St.
Torrance CA 90505
United States
SAGE Millimeter, Inc. is a technology company focused on developing high performance microwave and millimeterwave components and subassemblies for commercial and military system applications. SAGE Millimeter’s product offerings range from standard catalog products to custom designed, application, performance, or function-specific products. The primary product offering is in the frequency range of 18 to 140 GHz.

The catalog products are organized into ten families according to their functionalities. While these products cover most general application categories in the industry, SAGE Millimeter is committed to designing and manufacturing custom products to meet customers’ specifications or assisting customers to define their system products by using the most available microwave and millimeterwave technologies.

SAGE Millimeter principals have many years of experience in the microwave and millimeterwave component and subassembly industry. We possess comprehensive knowledge about the engineering and manufacturing process and the quality requirements of the industry. We maintain a strong commitment to quality and have been operating according to ISO 9001:2008 standards. We have established quality and operation processes to ensure that customers’ requirements and specifications are met and exceeded. In tradition of its founders, SAGE Millimeter is committed to satisfying customers by providing well engineered, cost effective, high quality and on time delivered products.

Located in Torrance, California, SAGE Millimeter benefits from the proximity of leading aerospace, defense and telecommunication companies, research laboratories and universities by taking advantage of skilled professionals and diversified vendors while working closely with industry leaders to design, develop and produce many state-of-the-art performance and specific application-oriented products.

Products

E Band Active X4 Multiplier: SFA-713863410-12KF-S1

April 10, 2014

2014-03-12 SFA-713863410-12KF-S1 E Band X4 Multiplier_EditedModel SFA-713863410-12KF-S1 is a 71 to 86 GHz X4 active multiplier which is designed for E-Band communications and automotive radar applications. The active multiplier converts 17.75 to 21.5 GHz / +5 dBm input signal to deliver 71 to 86 GHz frequency band with a typical +10 dBm output power.

Read More

E Band High ENR Noise Source: STZ-12-I2

April 10, 2014

2014-04-15 STZ-15-I1 V Band Noise SourceModel STZ-12-I2 is an E Band noise source with extremely high ENR. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer minimum 20 dB ENR in entire waveguide bandwidth from 60 to 90 GHz. 

Read More

E Band Noise Figure and Gain Test Set: STG-12-S1

April 10, 2014

2014-03-10 STG-12-S1 Noise Figure and Gain Test Set E BandModel STG-12-S1 is an E band noise figure and gain test set, which including a high performance solid-state E band noise source (STZ-12-I1) and a full waveguide band down converter (STC-20-12-S1). It extends the noise and gain measurement capacity from 10.0 to 15.0 GHz to the frequency range of 60 to 90 GHz.

Read More

Four Way Power Combiner: SWP-46347304-2F2F-C1

April 10, 2014

SWP-46347304-2F2F-C1Model SWP-46347304-2F2F-C1 is a Q band high Q four-way power combiner operating from 45.5 to 47 GHz. The power combiner exhibits better than 15 dB return loss, 2.0 dB insertion loss and 20 dB port to port isolations in the operational bandwidth. The power combiner possesses excellent phase and amplitude balance. The power combiner is equipped with 2.4 mm (female) connectors.

Read More

Full Band Low Noise Amplifier: SBL-7531142240-1010-S1

April 10, 2014

2014-04-14 SBL-7531102240-1010-S1 W Band Low Noise AmplifierModel SBL-7531142240-1010-S1 is a W band low noise amplifier covering entire W-band from 75 to 110 GHz .  The amplifier exhibits more than 20 dB small signal gain with ± 1.5 dB gain flatness and around 4.0 dB noise figure. The output P-1 dB of the amplifier is around 0 dBm typical and it draws 30 mA current from a single DC power supply in the range of +5 to +12 volts.

Read More

Integrated Transceiver Module: SSC-7737731200-1212-C1

April 10, 2014

2014-03-09 SSC-7737731200-1212-C1 Transceiver Module E BandModel SSC-7737731200-1212-C1 is a compact and cost-effective E band transceiver module operating in the frequency range of 76 to 78 GHz. The module is designed and fabricated for emerging automotive ACC radar applications. It can be used as FMCW transceiver for speed and distance measurements or radar target simulators for testing.

Read More

Omni-Directional Antenna: SAO-5836230230-15-S1

April 10, 2014

2014-04-13 SAO-5836230230-15-S1 V Band Omni Directional AntennaModel SAO-5836230230-15-S1 is a V Band vertically polarized omni-directional antenna with center frequency at 60 and ± 2 GHz operation bandwidth. The antenna is designed for close-in wireless communication applications. The antenna has 30 degree vertical beam width with a typical 2 dBi gain.

Read More

V Band Noise Source: STZ-15-I1

April 10, 2014

2014-04-15 STZ-15-I1 V Band Noise SourceModel STZ-15-I1 is a V Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 14 dB ENR with extreme flatness in entire waveguide bandwidth from 50 to 75 GHz.

Read More

Band Down Converter: STC-20-10-S1

February 14, 2014

STC-20-10-S1Model STC-20-10-S1 is a W band full waveguide band down converter with an RF range of 75 to 110 GHz. The full waveguide band down converter requires a +10 dBm LO signal in the frequency range of 12.5 to 18.33 GHz. It converts 75 to 110 GHz input signal to 10 MHz to 1.6 GHz output signal with a typical conversion gain of 20 dB. The required DC input is +12 Vdc / 450 mA.

Read More

Network Analyzer Extender: STN-SF908-00-P2

February 14, 2014

2014-02-05 STN-SF908-00-P2Model STN-SF908-00-P2 is an F band scalar network analyzer extender covers the frequency range of 90 to 140 GHz. It offers an alternative way of allowing users to achieve millimeter wave scalar measurement in a low cost approach without losing any of the functionalities and features that the industry standard models have to offer.

Read More

W-Band Active X6 Multiplier

January 21, 2014

SFA-923963618-10SF-S1Model SFA-923963618-10SF-S1 is a W-Band X6 active multiplier with center frequency at 94 GHz with minimum ± 2 GHz operational bandwidth. The active multiplier converts 15.33 to 16.0 GHz/+5 dBm input signal to deliver 92 to 96 GHz frequency band with more than +18 dBm power.

Read More

SAF-2733331624-315-S1 Feed Horn Antenna

December 16, 2013

2013-11-44 SAF-2733331624-315-S1 Ka Band Scalar Feed Horn AntennaModel SAF-2733331624-315-S1 is a Ka band scalar feed horn antenna with center frequency at 30 GHz and ± 3 GHz operation bandwidth. The antenna has 24 degree half power beamwidth with a typical of 16 dBi gain. The antenna offers lower than -25 dB sidelobe levels and supports both linear and circular polarization waveforms.

Read More

SFA-903983418-10KF-N1 W Band X4 Multiplier

December 16, 2013

2013-11-42 SFA-903983418-10KF-N1 W Band X4 MultiplierModel SFA-903983418-10KF-N1 is a W band X4 active multiplier with center frequency at 94 GHz with minimum ±4 GHz operational bandwidth. The active multiplier converts 22.5 to 24.5 GHz/+5 dBm input signal to +18 dBm output power in the frequency range of 90 to 98 GHz. The active multiplier has better than -25 dBc harmonic suppression.

Read More

SOM-67314308-15-M1 Gunn Oscillator

December 16, 2013

2013-11-43 SOM-67314308-15-M1 V Band Broadband Mechanically Tuned Gunn OscillatorModel SOM-67314308-15-M1 is a free running V band mechanically tuned Gunn oscillator with +8 dBm output power from 60.0 to 74.0 GHz. It is composed of a Ka band broadband mechanically tuned Gunn oscillator which can produce +20 dBm output power with +/-3.5 GHz bandwidth and a V band passive X2 multiplier.

Read More

SWP-50366308-15-C1 V Band Power Combiner

December 16, 2013

2013-11-41 SWP-50366308-15-C1 V Band 8 Way Power CombinerModel SWP-50366308-15-C1 is a V band waveguide eight-way power combiner operates from 50 to 66 GHz. The power combiner exhibits 2.0 dB insertion loss and 18 dB port to port isolations between non-adjacent ports and 13 dB between adjacent ports in the operational bandwidth.

Read More

STZ-12-I1 E Band Noise Source

November 26, 2013

2013-02-07 STZ-12-I1 IconModel STZ-12-I1 is an E Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 14 dB ENR with extreme flatness in entire waveguide bandwidth from 60 to 90 GHz.

Read More

W Band Active X6 Multiplier

November 18, 2013

2013-10-40 SFA-923963618-10SF-S1 W Band X6 MultiplierModel SFA-923963618-10SF-S1 is a W band X6 active multiplier with center frequency at 94 GHz with minimum ± 2 GHz operational bandwidth. The active multiplier converts 15.33 to 16.0 GHz/+5 dBm input signal to deliver 92 to 96 GHz frequency band with more than +18 dBm power. The active multiplier exhibits better than 60 dBc superior harmonic suppression performance. It draws 780 mA current from a +6 Vdc DC power supplier.

Read More

E Band Varactor Tuned Gunn Oscillator

November 18, 2013

SOV-77305215-12-I1Model SOV-77305215-12-I1 is an E band Varactor tuned InP Gunn oscillator which operates at 76.5 GHz center frequency with output power +15 dBm and ± 0.25 GHz voltage tuning bandwidth. The bias condition of the VCO is at +10.0 volts and 200 mA typically. To achieve ± 250 MHz, a voltage capable of swinging from 0 to +20 Vdc is required.

Read More

V Band Four Way Power Combiner

November 18, 2013

2013-10-39 SWP-55365304-15-C1 V Band 4 Way Power CombinerModel SWP-55365304-15-C1 is a V band waveguide four-way power combiner operates from 62 to 87 GHz. The power combiner exhibits 1.0 dB insertion loss and 20 dB port to port isolations between non-adjacent ports and 15 dB between adjacent ports in the operational bandwidth. The power combiner possesses excellent phase and amplitude balance.

Read More

W Band Lens Corrected Antenna

November 18, 2013

2013-10-37 SAL-9239634001-094-C1 W Band Lens Corrected Horn AntennaModel SAL-9239634001-094-C1 is a W band lens corrected antenna with center frequency at 94 GHz and ± 2 GHz operation bandwidth. The antenna has 1.2 degree half power beamwidth with a typical of 40 dBi gain. The design offers lower than -20 dB sidelobe levels and supports both linear and circular polarizations.

Read More

E Band Low Noise Amplifier: SBL-7438433060-1212-S1

October 11, 2013

2013-09-35 SBL-7438433060-1212-S1Model SBL-7438433060-1212-S1 is an E band low noise amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30 dB small signal gain with ± 2 dB gain flatness and around 6.0 dB noise figure.

Read More

E Band Power Amplifier: SBP-7438433012-1212-S1

October 11, 2013

2013-09-36 SBP-7438432012-1212-S1Model SBP-7438433012-1212-S1 is an E band power amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30dB small signal gain with ± 3 dB gain flatness.

Read More

E Band X5 Active Multiplier: SFA-743843516-12SF-N1

October 11, 2013

2013-09-34 SFA-743843516-12SF-N1Model SFA-743843516-12SF-N1 is an E band X5 active multiplier with center frequency at 79 GHz with minimum ± 5 GHz operational bandwidth. The active multiplier is designed and fabricated for emerging automotive ACC radar industry applications. The active multiplier converts 14.8 to 16.8 GHz/+5 dBm input signal to deliver 74 to 84 GHz frequency band.

Read More

Band Crossguide Coupler

September 16, 2013

SWX-40360320-19-4BModel SWX-40360320-19-4B is a four port, 20 dB U-band full waveguide band crossguide coupler. Unlike most commercial available narrow band couplers, the new crossguide coupler covers full U band waveguide operation. The crossguide coupler exhibits less than 0.5 dB insertion loss, greater than 20 dB return loss, +/- 1 dB coupling flatness and better than 15 dB directivity over the entire 40 to 60 GHz frequency band.

Read More

Coax Adapters: SWC-151F-R1 and SWC-151M-R1

September 16, 2013

2013-07-25 SWC-151F-R1 and SWC-151M-R1Model SWC-151F-R1 and SWC-151M-R1 are V band waveguide to 1 mm coaxial adapters. These adapters offer convenient mean for waveguide to coaxial line connection for full V band operations. Both WR-15 waveguide to 1mm (F) and WR-15 waveguide to 1 mm (M) coax adapters have less than 0.8 dB insertion loss and better than 16 dB return loss from 50 to 75 GHz.

Read More

Harmonic Mixer: STH-2MSF-S1

September 16, 2013

2013-07-24 STH-2M2F-S1 (2)Model STH-2MSF-S1 is a harmonic mixer to cover the frequency range from 25 to 50 GHz with 2.4 mm (M) coaxial connector as RF input port and SMA (F) connector as combined LO/ IF port. The harmonic mixer exhibits minimum -20 dBm receiving sensitivity cross the entire 25 to 50 GHz with +13 dBm LO driving power level. The LO frequency range is 5 to 6 GHz and IF is 1 to 1.5 GHz.

Read More

Orthomode Transducer: SAT-603-14115-S1

September 16, 2013

SAT-603-14115-S1Model SAT-603-14115-S1 is a V Band compact Orthomode Transducer (OMT) that operates at 61.5 GHz with 5 GHz operation bandwidth. This OMT exhibits 0.5 dB insertion loss, and 20 dB return loss. It also offers greater than 30 dB port to port isolation and cross polarization over the entire operating frequency band.

Read More

SP4T Switch: SK4-2734034540-KFKF-R1

September 16, 2013

2013-08-28 SK4-2734034540-KFKF-R1Model SK4-2734034540-KFKF-R1 is a broadband high isolation PIN diode single pole four throw switch. The switch operates from 26.5 to 40.0 GHz. It has better than 40 dB isolation and 5.5 dB typical insertion loss over the entire frequency range. The power handling and input P-1 dB of the switch is greater than +30 dBm CW.

Read More

W Band Noise Source: STZ-10-I1

September 16, 2013

2013-08-29 STZ-10-I1Model STZ-10-I1 is a W Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 12 dB ENR with extreme flatness in entire waveguide bandwidth from 75 to 110 GHz.

Read More

Waveguide Detector: SFD-753114-10SF-N1

September 16, 2013

SFD-753114-10SF-N1Model SFD-753114-10SF-N1 is a GaAs Schottky beamlead diode based W band waveguide detector with negative output voltage polarity. The detector has 800mV/mW small signal detection sensitivity and +/-2.0 dB flatness in the entire 75 to 110 GHz operation frequency bandwidth.

Read More

EBand Passive Tripler: SFP-123KF-S1

June 25, 2013

sfp-123kf-s1Model SFP-123KF-S1 is a resistive diode based passive tripler. The tripler is designed and build with a balanced waveguide configuration, which offers low harmonic emission and high conversion efficiency. The tripler exhibits 20 dB typical conversion loss and converts +20 dBm input power at 20 to 30 GHz to 0 dBm minimum output power at 60 to 90 GHz.

Read More

Ka Band Waveguide Lowpass Filter: SWF-60390350-28-L1

June 25, 2013

swf-60390350- Model SWF-60390350-28-L1 is a custom designed Ka-Band waveguide lowpass filter. The filter features low insertion loss and high rejection. The filter shows 1.2 dB maximum insertion loss from 26 to 60 GHz and greater than 50 dB rejection in the frequency range of 90 to 145 GHz.

Read More

Subharmonically Pumped Mixer: SFS-60390315-10VFSF-S1

June 25, 2013

sfs-60390315-Model SFS-60390315-10VFSF-S1 is an E-Band, subharmonically pumped mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration to produce superior RF performance. The subharmonically pumped mixer is capable for full RF waveguide band operation for RF frequencies from 60 to 90 GHz with half of the LO frequency: 30.0 to 45.0 GHz.

Read More

WR-10 Waveguide to 1 mm Coax Adapters

May 29, 2013

2012-06 SWC-101F-R1 and SWC-101M-R1 (2)Model SWC-101F-R1 and SWC-101M-R1 are W band waveguide to 1 mm coaxial adapters. These adapters offer convenient mean for waveguide to coaxial line connection for full W band operations. Both WR-10 waveguide to 1mm (F) and WR-10 waveguide to1 mm (M) coax adapters have less than 1.0 dB insertion loss and better than 15 dB return loss from 75 to 110 GHz.

Read More

D-Band, Externally Biased Balanced Mixer

May 21, 2013

SFB-06-E2Model SFB-06-E2 is a D-Band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beam lead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very low LO pumping level. The low LO pumping level is desirable feature at higher millimeter-wave bands.

Read More

X Band 10 W Linear Power Amplifier

May 21, 2013

SBP-1031133040-SFSF-C1Model SBP-1031133040-SFSF-C1 is an X band power amplifier which delivers 30 dB small signal gain and 10 W linear power to cover 9.5 to 10.5 GHz frequency range. The amplifier integrates input and output isolators to offer better than 1.2:1 VSWR and safe operation when input or output show extreme load conditions.

Read More

24 to 40 GHz Active Frequency Doubler

May 21, 2013

SFA-243403215-28SF-W1Model SFA-243403215-28SF-W1 is an active frequency multiplier to cover the output frequency range of 24 to 40 GHz. The required input power is +5 dBm and achieved output power is +13 dBm, which is sufficient to drive a Ka band balanced mixer to form a low cost down converter module.

Read More

37.0 GHz Dielectric Resonator Oscillator

May 21, 2013

SOD-01213-22-S1Model SOD-01213-22-S1 is a 37 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator and the high frequency stability is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +13 dBm output power and low phase noise of -95 dBc/Hz at 100 KHz offset.

Read More

D Band Frequency Extender

May 21, 2013

STE-SF906-00-N1Model STE-SF906-00-N1 is a D band frequency extender, which extends the input frequency of 12 to19 GHz to a full waveguide bandwidth, 110 to 170 GHz operation. The frequency extender combines high performance millimeter passive multipliers, amplifiers and filters to extend the low frequency sweeper or synthesizer to D band frequency band.

Read More

E Band Mechanically Tuned Gunn Oscillator

May 21, 2013

SOM-77302320-12-S1Model SOM-77302320-12-S1 is a free running E band mechanically tuned Gunn oscillator with output power 20 dBm and tuning bandwidth +/- 1 GHz. The mechanical tuning is accomplished via a self-locking tuning screw or micrometer. The bias voltage and current to operate the oscillator is at +10 Vdc and 200 mA typically. The oscillator is also bias tunable to allow frequency modulation via its bias port.

Read More

E Band Single Sideband Down Converter

May 21, 2013

STC-12-S1Model STC-12-S1 is a single sideband E-Band down converter, which down convert the entire E Band frequency, 60 to 90 GHz, to an IF frequency from 2 to 32 GHz. The converter includes a Gunn oscillator, a full band balanced mixer, a highpass filter and a full band isolator. The built-in Gunn oscillator operates at 58 GHz with + 5.0 volts at 450 mA DC bias.

Read More

K Band 50 W High Power Load

May 21, 2013

2013-04-15 SWL-4247-S1 50 Watts High Power LoadModel SWL-4247-S1 is a WR-42 waveguide high power matching load. The load offers better than 1.20:1 VSWR in the frequency range of 18.0 to 26.5 GHz. The power handling of the load is 50 W CW. The load measures 1.75” W x 6.30” L x 1.75” H.

Read More

K Band Lens Antenna Based FMCW Range Sensors

May 21, 2013

SSD-24310-22L-S1 and -D1Model SSD-24310-22L-S1 and SSD-24310-22L-D1 are K band FMCW ranging sensors. While model SSD-24310-22L-S1 offers single channel output for speed and ranging sensing only, model SSD-24310-22L -D1 offers speed, direction and ranging sensing simultaneously. The sensors operate at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and 10 dBm nominal output power.

Read More

K Band Speed Sensors

May 21, 2013

SSS-24307-27M-S1 and -D1Model SSS-24307-27M-S1 and SSS-24307-27M-D1 speed sensor heads are based on Doppler principle. While Model SSS-24307-27M-S1 is designed and manufactured for moving target speed measurement, Model SSS-24307-27M-D1 is for both speed and direction detection measurement. The operation frequency and output power of the models are at 24.125 GHz and 7 dBm, respectively.

Read More

Low Cost K Band FMCW Ranging and Directional Sensor Module

May 21, 2013

SSP-24303-42-D1Model SSP-24303-42-D1 is a low cost, production ready K band FMCW ranging and directional sensor module. The center frequency of the module is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +3 dBm nominal output powers. The sensor operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.

Read More

Low Cost K Band FMCW Ranging Sensor Module

May 21, 2013

SSP-24305-42-S1Model SSP-24305-42-S1 is a low cost, production ready K band FMCW ranging sensor module. The center frequency of the module is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +5 dBm nominal output power. The sensor operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.

Read More

Low Cost K Band Varactor Tuned Gunn Oscillator

May 21, 2013

SOL-24307-42-VGModel SOL-24307-42-VG is a low cost, production ready K band Varactor tuned Gunn oscillator. The center frequency of the VCO is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +7 dBm nominal output powers. The VCO operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.

Read More

V-Band, Externally Biased Balanced Mixer

May 21, 2013

SFB-15-N2Model SFB-15-N2 is a V-Band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very low LO pumping level. The externally biased mixer is capable for full RF waveguide band operation for both LO and RF frequencies from 50 to 75 GHz.

Read More

W-Band High Directivity Directional Coupler

May 21, 2013

SWD-1040H-10-SBModel SWD-1040H-10-SB is a 10 dB W-band high directivity directional coupler. The directional coupler is based on traditional multi-hole coupling mechanism. The directional coupler is constructed with machined brass waveguide housings. With detailed electrical/mechanical design and precision fabrication process, the directional coupler offers instrumentation quality and superior RF performance.

Read More

W-Band Passive Tripler

May 21, 2013

SFP-10328-S1Model SFP-10328-S1 is a resistive diode based passive tripler. The tripler is designed and build with a balanced waveguide configuration, which offers low harmonic emission and high conversion efficiency. The tripler exhibits 20 dB typical conversion loss and converts +20 dBm input power at 25 GHz to 37 GHz to 0 dBm power at 75 to 111 GHz.

Read More

W-Band Subharmonically Pumped Mixer

May 21, 2013

SFS-75311416-10VFSF-S1Model SFS-75311416-10VFSF-S1 is a W-Band, subharmonically pumped mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration to produce superior RF performance. The subharmonically pumped mixer is capable for full RF waveguide band operation for RF frequencies from 75 to 110 GHz with half of the LO frequency: 37.5 to 55.0 GHz. The conversion loss measured was 12 to 16 dB at +13 dBm LO pumping level typically.

Read More

WR-10 Waveguide to 1 mm End Launch Adapter

May 21, 2013

SWC-101F-E1Model SWC-101F-E1 is a W band waveguide to coaxial inline adapter. The adapter offers a convenient mean for WR-10 waveguide to 1 mm (F) connector transition. The inline configuration offers convenient mean for the coaxial testing cable to waveguide adaption.

Read More

WR-12 Waveguide to 1 mm End Launch Adapter

May 21, 2013

SWC-121F-E1Model SWC-121F-E1 is an E band waveguide to coaxial inline adapter. The adapter offers a convenient mean for WR-12 waveguide to 1mm (F) connector transition. The inline configuration offers convenient mean for the coaxial testing cable to waveguide adaption.

Read More

WR-22 Waveguide to Coax Adapters

May 21, 2013

SWC-222F-R1 and 222M-R1Model SWC-222F-R1 and SWC-222M-R1 are Q band waveguide to coaxial adapters. These adapters offer a convenient mean for waveguide to coaxial connector transition. These adapters have less 0.3 dB insertion loss and better than 18 dB return loss in frequency range of 33 to 50 GHz for both 2.4 mm (F) and 2.4 mm (M) connector types.

Read More

WR-42 Full Waveguide Junction Isolator

May 21, 2013

SNF-42-I1Model SNF-42-I1 is a full waveguide band junction isolator covering the frequency range from 18 to 26.5 GHz in WR-42 waveguide band. The isolator offers 0.3 dB typical insertion loss and 8 dB minimum isolation. The operating temperature is from -35 to +60 °C and the forward power handling is 2 W minimum.

Read More

WR-51 High Power Isolator

May 21, 2013

SNW-1431530320-51-IH2Model SNW-1431530320-51-IH2 is a WR-51 waveguide high power isolator. The isolator is a junction type isolator, which has less than 0.25 dB insertion loss and better than 25 dB isolator in the frequency range of 14.0 to 14.5 GHz.

Read More

W-Band Quadrature (I/Q) Mixer: SFQ-94394312-1010SF-S1

April 26, 2013

Sage Millimeter Image SFQ-94394312-1010S1-F1Model SFQ-94394312-1010SF-S1 is a W-Band quadrature (I/Q) mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary circuitry to produce superior RF performance.

Read More

Dielectric Resonator Oscillator: SOD-01213-22-S1

April 04, 2013

sod-01213-22-s1Model SOD-01213-22-S1 is a 37 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator and the high frequency stability is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +13 dBm output power and low phase noise of -95 dBc/Hz at 100 KHz offset. The frequency stability of the oscillator is +/- 3 ppm per degree C or better in the temperature range of -40 to +85° C.

Read More

Linear to Circular Polarizer: SAS-693-14115-F1

April 04, 2013

sas-693-14115-f1Model SAS-693-14115-F1 is a 66 to 72 GHz Linear to Circular Polarizer. The polarizer exhibits 1.0 dB maximum insertion loss, 1.3:1 VSWR and 1.2 dB axial ratio. The RF interface is 0.141” diameter circular waveguide with UG385/U flange for standard WR-15 waveguide interface.

Read More

Your request will be e-mailed directly to the company who will follow up with the requested information. This request is for legitimate sales inquires only – please do not submit promotions, solicitations or spam.

Back to Listings

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement