Model SFS-60390315-10VFSF-S1 is an E-Band, subharmonically pumped mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration to produce superior RF performance. The subharmonically pumped mixer is capable for full RF waveguide band operation for RF frequencies from 60 to 90 GHz with half of the LO frequency: 30.0 to 45.0 GHz.
Model SWC-101F-R1 and SWC-101M-R1 are W band waveguide to 1 mm coaxial adapters. These adapters offer convenient mean for waveguide to coaxial line connection for full W band operations. Both WR-10 waveguide to 1mm (F) and WR-10 waveguide to1 mm (M) coax adapters have less than 1.0 dB insertion loss and better than 15 dB return loss from 75 to 110 GHz.
Model SWL-4247-S1 is a WR-42 waveguide high power matching load. The load offers better than 1.20:1 VSWR in the frequency range of 18.0 to 26.5 GHz. The power handling of the load is 50 W CW. The load measures 1.75” W x 6.30” L x 1.75” H.
Model SFA-243403215-28SF-W1 is an active frequency multiplier to cover the output frequency range of 24 to 40 GHz. The required input power is +5 dBm and achieved output power is +13 dBm, which is sufficient to drive a Ka band balanced mixer to form a low cost down converter module.
Model SOD-01213-22-S1 is a 37 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator and the high frequency stability is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +13 dBm output power and low phase noise of -95 dBc/Hz at 100 KHz offset.
Model SNF-42-I1 is a full waveguide band junction isolator covering the frequency range from 18 to 26.5 GHz in WR-42 waveguide band. The isolator offers 0.3 dB typical insertion loss and 8 dB minimum isolation. The operating temperature is from -35 to +60 °C and the forward power handling is 2 W minimum.
Model SSP-24303-42-D1 is a low cost, production ready K band FMCW ranging and directional sensor module. The center frequency of the module is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +3 dBm nominal output powers. The sensor operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.
Model SSP-24305-42-S1 is a low cost, production ready K band FMCW ranging sensor module. The center frequency of the module is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +5 dBm nominal output power. The sensor operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.
Model SOL-24307-42-VG is a low cost, production ready K band Varactor tuned Gunn oscillator. The center frequency of the VCO is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +7 dBm nominal output powers. The VCO operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.