- Buyers Guide
Articles by SAGE Millimeter Inc., Torrance, CA
Model SFB-06-E2 is a D-Band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beam lead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very low LO pumping level. The low LO pumping level is desirable feature at higher millimeter-wave bands.
Model SWC-222F-R1 and SWC-222M-R1 are Q band waveguide to coaxial adapters. These adapters offer a convenient mean for waveguide to coaxial connector transition. These adapters have less 0.3 dB insertion loss and better than 18 dB return loss in frequency range of 33 to 50 GHz for both 2.4 mm (F) and 2.4 mm (M) connector types.
Model SWD-1040H-10-SB is a 10 dB W-band high directivity directional coupler. The directional coupler is based on traditional multi-hole coupling mechanism. The directional coupler is constructed with machined brass waveguide housings. With detailed electrical/mechanical design and precision fabrication process, the directional coupler offers instrumentation quality and superior RF performance.
Model SOM-77302320-12-S1 is a free running E band mechanically tuned Gunn oscillator with output power 20 dBm and tuning bandwidth +/- 1 GHz. The mechanical tuning is accomplished via a self-locking tuning screw or micrometer. The bias voltage and current to operate the oscillator is at +10 Vdc and 200 mA typically. The oscillator is also bias tunable to allow frequency modulation via its bias port.
Model STC-12-S1 is a single sideband E-Band down converter, which down convert the entire E Band frequency, 60 to 90 GHz, to an IF frequency from 2 to 32 GHz. The converter includes a Gunn oscillator, a full band balanced mixer, a highpass filter and a full band isolator. The built-in Gunn oscillator operates at 58 GHz with + 5.0 volts at 450 mA DC bias.
Model SFB-15-N2 is a V-Band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very low LO pumping level. The externally biased mixer is capable for full RF waveguide band operation for both LO and RF frequencies from 50 to 75 GHz.
Model SSS-24307-27M-S1 and SSS-24307-27M-D1 speed sensor heads are based on Doppler principle. While Model SSS-24307-27M-S1 is designed and manufactured for moving target speed measurement, Model SSS-24307-27M-D1 is for both speed and direction detection measurement. The operation frequency and output power of the models are at 24.125 GHz and 7 dBm, respectively.
Model SBP-1031133040-SFSF-C1 is an X band power amplifier which delivers 30 dB small signal gain and 10 W linear power to cover 9.5 to 10.5 GHz frequency range. The amplifier integrates input and output isolators to offer better than 1.2:1 VSWR and safe operation when input or output show extreme load conditions.
Model SFQ-94394312-1010SF-S1 is a W-Band quadrature (I/Q) mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary circuitry to produce superior RF performance.
Model SOD-01213-22-S1 is a 37 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator and the high frequency stability is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +13 dBm output power and low phase noise of -95 dBc/Hz at 100 KHz offset. The frequency stability of the oscillator is +/- 3 ppm per degree C or better in the temperature range of -40 to +85° C.