advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles by SAGE Millimeter Inc., Torrance, CA

Harmonic Mixer: STH-2MSF-S1

September 16, 2013

2013-07-24 STH-2M2F-S1 (2)Model STH-2MSF-S1 is a harmonic mixer to cover the frequency range from 25 to 50 GHz with 2.4 mm (M) coaxial connector as RF input port and SMA (F) connector as combined LO/ IF port. The harmonic mixer exhibits minimum -20 dBm receiving sensitivity cross the entire 25 to 50 GHz with +13 dBm LO driving power level. The LO frequency range is 5 to 6 GHz and IF is 1 to 1.5 GHz.


Read More

Ka-Band Digital Attenuator

August 14, 2013

EBand Passive Tripler: SFP-123KF-S1

June 25, 2013

sfp-123kf-s1Model SFP-123KF-S1 is a resistive diode based passive tripler. The tripler is designed and build with a balanced waveguide configuration, which offers low harmonic emission and high conversion efficiency. The tripler exhibits 20 dB typical conversion loss and converts +20 dBm input power at 20 to 30 GHz to 0 dBm minimum output power at 60 to 90 GHz.


Read More

Ka Band Waveguide Lowpass Filter: SWF-60390350-28-L1

June 25, 2013

swf-60390350- Model SWF-60390350-28-L1 is a custom designed Ka-Band waveguide lowpass filter. The filter features low insertion loss and high rejection. The filter shows 1.2 dB maximum insertion loss from 26 to 60 GHz and greater than 50 dB rejection in the frequency range of 90 to 145 GHz.


Read More

Subharmonically Pumped Mixer: SFS-60390315-10VFSF-S1

June 25, 2013

sfs-60390315-Model SFS-60390315-10VFSF-S1 is an E-Band, subharmonically pumped mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration to produce superior RF performance. The subharmonically pumped mixer is capable for full RF waveguide band operation for RF frequencies from 60 to 90 GHz with half of the LO frequency: 30.0 to 45.0 GHz.


Read More

WR-10 Waveguide to 1 mm Coax Adapters

May 29, 2013

2012-06 SWC-101F-R1 and SWC-101M-R1 (2)Model SWC-101F-R1 and SWC-101M-R1 are W band waveguide to 1 mm coaxial adapters. These adapters offer convenient mean for waveguide to coaxial line connection for full W band operations. Both WR-10 waveguide to 1mm (F) and WR-10 waveguide to1 mm (M) coax adapters have less than 1.0 dB insertion loss and better than 15 dB return loss from 75 to 110 GHz.


Read More

K Band 50 W High Power Load

May 21, 2013

2013-04-15 SWL-4247-S1 50 Watts High Power LoadModel SWL-4247-S1 is a WR-42 waveguide high power matching load. The load offers better than 1.20:1 VSWR in the frequency range of 18.0 to 26.5 GHz. The power handling of the load is 50 W CW. The load measures 1.75” W x 6.30” L x 1.75” H.


Read More

24 to 40 GHz Active Frequency Doubler

May 21, 2013

SFA-243403215-28SF-W1Model SFA-243403215-28SF-W1 is an active frequency multiplier to cover the output frequency range of 24 to 40 GHz. The required input power is +5 dBm and achieved output power is +13 dBm, which is sufficient to drive a Ka band balanced mixer to form a low cost down converter module.


Read More

37.0 GHz Dielectric Resonator Oscillator

May 21, 2013

SOD-01213-22-S1Model SOD-01213-22-S1 is a 37 GHz dielectric resonator oscillator (DRO). The oscillator is a free running oscillator and the high frequency stability is achieved by implementing a high quality dielectric resonator. The oscillator exhibits +13 dBm output power and low phase noise of -95 dBc/Hz at 100 KHz offset.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement