- Buyers Guide
Articles by SAGE Millimeter Inc., Torrance, CA
Model STZ-12-I1 is an E Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 14 dB ENR with extreme flatness in entire waveguide bandwidth from 60 to 90 GHz.
Model SAL-9239634001-094-C1 is a W band lens corrected antenna with center frequency at 94 GHz and ± 2 GHz operation bandwidth. The antenna has 1.2 degree half power beamwidth with a typical of 40 dBi gain. The design offers lower than -20 dB sidelobe levels and supports both linear and circular polarizations.
Model SOV-77305215-12-I1 is an E band Varactor tuned InP Gunn oscillator which operates at 76.5 GHz center frequency with output power +15 dBm and ± 0.25 GHz voltage tuning bandwidth. The bias condition of the VCO is at +10.0 volts and 200 mA typically. To achieve ± 250 MHz, a voltage capable of swinging from 0 to +20 Vdc is required.
Model SWP-55365304-15-C1 is a V band waveguide four-way power combiner operates from 62 to 87 GHz. The power combiner exhibits 1.0 dB insertion loss and 20 dB port to port isolations between non-adjacent ports and 15 dB between adjacent ports in the operational bandwidth. The power combiner possesses excellent phase and amplitude balance.
Model SFA-923963618-10SF-S1 is a W band X6 active multiplier with center frequency at 94 GHz with minimum ± 2 GHz operational bandwidth. The active multiplier converts 15.33 to 16.0 GHz/+5 dBm input signal to deliver 92 to 96 GHz frequency band with more than +18 dBm power. The active multiplier exhibits better than 60 dBc superior harmonic suppression performance. It draws 780 mA current from a +6 Vdc DC power supplier.
Model SFA-743843516-12SF-N1 is an E band X5 active multiplier with center frequency at 79 GHz with minimum ± 5 GHz operational bandwidth. The active multiplier is designed and fabricated for emerging automotive ACC radar industry applications. The active multiplier converts 14.8 to 16.8 GHz/+5 dBm input signal to deliver 74 to 84 GHz frequency band.
Model SBL-7438433060-1212-S1 is an E band low noise amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30 dB small signal gain with ± 2 dB gain flatness and around 6.0 dB noise figure.
Model SBP-7438433012-1212-S1 is an E band power amplifier with center frequency at 79 GHz with ± 5 GHz operation bandwidth. The amplifier is designed and fabricated for emerging automotive ACC radar industry applications. The amplifier exhibits more than 30dB small signal gain with ± 3 dB gain flatness.
Model SAT-603-14115-S1 is a V Band compact Orthomode Transducer (OMT) that operates at 61.5 GHz with 5 GHz operation bandwidth. This OMT exhibits 0.5 dB insertion loss, and 20 dB return loss. It also offers greater than 30 dB port to port isolation and cross polarization over the entire operating frequency band.