PMI Model No. P6T-2G18G-60-T-512-SFF-LV is a single pole, six throw, absorptive, low video transient, solid state switch operating over the frequency range of 2.0 to 18.0 GHz. This model has a maximum insertion loss of 4.0 dB and a minimum isolation specification of 60 dB with video transients of 2 mV typically.
PMI Model No. DRO-12D3G-CD-1 is a dielectrically stabilized GaAs FET oscillator with a center frequency of 12.3 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -75 dBc/Hz.
PMI Model No. DRO-14D3G-CD-1 is a dielectrically stabilized GaAs FET oscillator with a center frequency of 14.3 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -70 dBc/Hz.
PMI Model No. DRO-16D3G-CD-1 is a dielectrically stabilized GaAs FET oscillator with a center frequency of 16.3 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -70 dBc/Hz. The unit requires +15 VDC and 150 mA and measures 1.06" x 1.63" x 0.98".
PMI Model No. P2T-100M40G-95-T-512-292FF is an absorptive, single pole, two throw pin diode switch that operates over the frequency range of 0.1 to 40.0 GHz. This model incorporates a TTL compatible driver for easy system integration.
PMI Model No. DRO-7D7G-CD-1 is a dielectrically stabilized GaAs FET Oscillator with a center frequency of 7.7 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -80 dBc/Hz. The unit requires +15 VDC and 150 mA and measures 1.60" x 2.75" x 1.04".
PMI Model No. DRO-9D7G-CD-1 is a dielectrically stabilized GaAs FET Oscillator with a center frequency of 9.7 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -75 dBc/Hz. The unit requires +15 VDC and 150 mA and measures 1.35" x 1.98" x 1.04".
PMI Model No. PIQ-2G18G-360-16-CD-1 is a 2.0 to 18.0 GHz, high performance I/Q Vector Modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 16 dB of amplitude control.
PMI Model No. DRO-11D7G-CD-1 is a dielectrically stabilized GaAs FET oscillator with a center frequency of 11.7 GHz. This model provides minimum output power of +11 dBm with all spurs held to -55 dBc and harmonics held to -20 dBc. The mechanical tuning frequency is +/-25 MHz and the unit has a phase noise of -75 dBc/Hz.
PMI Model No. PE2-30-9R010R0-2R5-21-12-SFF is a low noise amplifier that operates over the 9.0 to 10.0 GHz frequency range. This model provides a typical gain of 30 dB while maintaining a noise figure of 2.5 dB and a OP1 dB of 21 dBm minimum. The input and output VSWR is better than 2.0:1 and this model operates on +12 to +15 VDC.