Articles by RFMW Ltd.

RFMW Ltd. announces design and sales support for MECA Electronics microwave and millimeter-wave isolators. Optimized for excellent performance across K, Ku, and Ka bands, these 2 W isolators cover 18.0 to 26.5 GHz, 27.0 to 31.0 GHz and 26.5 to 40.0 GHz.

RFMW Ltd. announces design and sales support for two, highly integrated front-end modules from Qorvo. The QPB9324 and QPB9325 combine a high power handling (52 W) switch with two low noise amplifiers targeting wireless infrastructure applications configured for TDD-based architectures.

RFMW Ltd. announces design and sales support for dipole antennas with integrated gooseneck transmission lines and internal bandpass filtering. The 1001-134 includes a 3-pole, bandpass filter to reduce interference from co-located radios operating outside the antenna’s 1.35 to 1.40 GHz operational frequency range.

RFMW Ltd. announces design and sales support for the Qorvo QPA9805, 700 to 1000 MHz balanced amplifier. With integrated hybrid couplers, the QPA9805 provides good return loss and gain flatness across the band.

RFMW Ltd. announces design and sales support for the Skyworks Solutions SKY66114-11, a low power front end module for bluetooth low energy (BLE) applications. A fully integrated 2.4 GHz module, the SKY66114-11 offers 23 dBm Tx output power which quadruples the effective range of standalone system on chip (SoC) solutions.

RFMW Ltd. announces design and sales support for a multi octave bandwidth, GaN, solid state power amplifier from Aethercomm. model number SSPA 6.0-18.0-30 operates from 6 to 18 GHz and delivers 30 W (typ.) of saturated output power to the load. Typical small signal gain is 45 to 55 dB while typical power gain is 40 to 45 dB. A PA Enable Command is used to gate the PA on and off.

RFMW Ltd. announces design and sales support for small form factor antenna from Southwest Antennas. The 1001-202 is a half-wave dipole, omni antenna for 2.1 to 2.5 GHz applications. Measuring only 4.29 inches in height, it offers 2.15 dBi of peak gain.  The antenna features a tough, black, G10 fiberglass radome and a black-chrome, TNC(m), non-rotating, RF connector.

RFMW Ltd. announces design and sales support for a high power, solid state power amplifier from Aethercomm. Designed for high power, linear applications in both ground and airborne systems, the SSPA 2.0-6.0-250 delivers a nominal 250 W from 2.0 to 6.0 GHz and attains 300 W of saturated RF power for non-linear requirements. The SSPA 2.0-6.0-250 offers 70 dB of small signal gain.

RFMW Ltd. announces design and sales support for a pair of Peregrine Semiconductor, high frequency, silicon on insulator (SOI) switches. The PE42525 and PE426525 are SPDT switches operating from 9 KHz to 60 GHz. Both switches offer fast, 8 nS switching time and high input linearity of 48 dBm IIP3. The PE42525 finds applications in test & measurement. The PE426525 is targeted towards harsh industrial applications.