Articles by Crystek Corp.

 Crystek Corp. has launched the CCPD-575, a new ultra-low phase noise LVPECL oscillator providing a -162 dBc/Hz noise floor.  Compact and powerful, the CCPD-575 has an industry leading phase noise for an LVPECL oscillator – at least 15 dB lower phase noise than most LVPECL oscillators on the market today. Close-in phase noise is also excellent @ -90 dBc/Hz for the 100 MHz variant. This overall ultra-low phase noise translates to a typical phase jitter of 85 fS RMS (12 kHz to 20 MHz). 

Crystek has introduced a new line of BNC Low Pass Filters to its CLPFL Series of Low Pass Filters, well as a BNC High Pass Filter to its CHPFL line of High Pass Filters.  Encased in a rugged BNC housing with 50 ohm connectors, these filters are designed for test equipment and general lab use.

Crystek's CVCO55CC-3000-3000 VCO (Voltage Controlled Oscillator) operates at 3000 MHz with a control voltage range of 0.5 to 4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is +7.0 dBm typ.

Crystek's CVCO55CC-1690-1690 VCO (Voltage Controlled Oscillator) operates at 1690 MHz with a control voltage range of 0.3 to 4.7 V

Crystek's CVCO55CC-4124-4238 VCO (Voltage Controlled Oscillator) operates from 4124 to 4238 MHz with a control voltage range of 0.1 to16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. 

 Crystek's CVCO55CC-1680-1680 VCO (Voltage Controlled Oscillator) operates at 1680 MHz with a control voltage range of 0.5 to 4.5 V. This VCO features a typical phase noise of -117 dBc/Hz @ 10KHz offset and has excellent linearity. 

 Crystek's CVCO55FL-0200-0239 VCO (Voltage Controlled Oscillator) operates from 200 to 239 MHz with a control voltage range of 0.5 to 4.5 V.  

 Crystek's CVCO55CC-2756-2756 VCO (Voltage Controlled Oscillator) operates at 2756 MHz with a control voltage range of 0.5 to 4.5 V. This VCO features a typical phase noise of -116 dBc/Hz at 10 KHz offset and has excellent linearity. 

 Crystek's CVCO55BE-1000-2000 VCO (Voltage Controlled Oscillator) operates from 1000 MHz to 2000 MHz with a control voltage range of 1.0V~20V. This VCO features a typical phase noise of -95 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.5 dBm. 

Crystek's CVCO55CC-3274-3280 voltage controlled oscillator (VCO) operates from 3274 MHz to 3280 MHz with a control voltage range of 0.3 to 4.7 V. This VCO features a typical phase noise of -115 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +5 dBm.