Skyworks is pleased to introduce two SPDT 75 Ohm switches that are ideal for set-top box and DVR applications. The SKY13547-490LF and SKY13548-385LF feature ultra-high linearity and meet the rigorous requirements of DOCSIS 3.0/3.1 applications. They also boast very low insertion loss and high power handling capability. Skyworks’ new switches are fully integrated and internally matched, reducing bill of material costs for customers.
Skyworks Solutions Inc. unveiled SkyLiTE™ 2.0, its next generation front-end solution powering LTE devices. This highly integrated platform provides smartphone manufacturers with a complete front-end system that meets today’s carrier aggregation (CA) design challenges. The devices are baseband agnostic and incorporate amplification, switching, Wi-Fi filtering, and coupler functionality required to support all major FDD/TDD bands.
Skyworks is pleased to introduce two broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs) designed specifically for set-top box applications: the SKY65450-92LF (with bypass mode) and the SKY65452-92LF. These devices provide high linearity and excellent gain over a wide frequency range (40 MHz to 1 GHz) with minimal external components, enabling OEMs to leverage cost efficiencies through lower bill of materials.
Skyworks is pleased to introduce a dual-band single-pole four-throw (SP4T) WiFi switch with integrated GPIO interface and 50 Ohm match on all RF output ports. The SKY13575-639LF is ideal fordual-band switching in Wi-Fi access points, WLAN 802.11ac and 3G/4G LTE systems and is also suitable for access points, customer-premises equipment (CPE), LTE systems, dual-band WLAN and test and measurement equipment.
Skyworks Solutions Inc. launched SkyOne® Ultra 2.0, a highly integrated, single LTE SKU solution that solves harmonically-related carrier aggregation challenges through design while delivering the highest linear RF power as well as power added efficiency in the world. This next generation platform is a complete RF front-end system consisting of three LTE modules which utilize Skyworks' revolutionary SkyBlue™ technology in addition to a separate 2G transmitter.
Skyworks introduces the SKY81298 triple channel LED flash driver. The SKY81298 is optimized for LED flash applications implementing tri-tone flash LED color compensation, or dual rear LED flash, plus single front LED flash to support “selfie” pictures taken from the front-facing camera. The SKY81298 actively monitors battery/system voltage and reduces flash current automatically to avoid system brownout, allowing the flash to operate over a wider (lower) battery range.
Skyworks introduces two high power, surface mount, series connected PIN diodes suitable for high-power, high-volume, large signal switch and attenuator applications ranging from 10 MHz to beyond 6 GHz. Typical resistance for the SMP1331-085LF and SMP1331-087LF is 0.50 Ω at 100 mA is and the maximum capacitance is 0.35 pF at 30 V. The low capacitance, low parasitic inductance devices are ideal for use in land mobile radios and infrastructure systems.
Skyworks introduces two global navigation low-noise amplifier front-end modules with integrated filters: the SKY65713-11 and SKY65715-81. Both solutions support products integrating GNSS functionality such as smartphones, personal navigation devices, wearables, machine to machine (M2M) systems, base stations, asset tracking instruments, professional radios and Internet of Things applications.
Skyworks introduces two global navigation low noise amplifiers. The SKY65605-21 and SKY65611-21 are both designed for BeiDou/GPS/GLONASS/Galileo receiver applications and are optimized to operate from 1559 to 1606 MHz. Each device integrates all output matching components, thereby requiring only a single external input matching component.The devices provide high linearity, excellent gain, a high 1 dB input compression point (IP1 dB), and a superior noise figure.
Skyworks offers two low-power Bluetooth® low energy (BLE) front-end modules (FEMs) for connected home, wearable and industrial applications. The SKY66110-11 and SKY66111-11 FEMs operate between 2.4 to 2.485 GHz, with power consumption of only 10 mA in transmit mode. The FEMs more than double the range when compared to a standalone system on chip solution. The SKY66111-11 FEM features adjustable output power.