For the new EW and radar systems, Renaissance has designed a high performance circulator covering 1.25 to 1.40 GHz capable of handling 3 kW peak and 300 W average power levels. With low loss of 0.3 dB and isolation of 20 dB, it is optimized for airborne/flight applications.
Renaissance has designed a 12 x 12 programmable delay line (PDL) matrix that can be used to simulate targets for phased array radar and receiver optimization. Each of the 12 inputs is connected to dividers, programmable attenuators and a programmable delay line matrix. The amplitude and phase are controlled by custom software with custom defines UDP protocols.
Renaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC to 3 GHz with 5.5 dB insertion loss and can attenuate 100 dB in 1 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.
Renaissance Electronics has developed a new low PIM attenuator perfect for ATE applications which covers DC to 3.0 GHz. Available in multiple attenuation values and handling 100 W CW, the attenuator exhibits -145 dBc of PIM distortion; making it ideal for test applications which require extremely low PIM.
Renaissance has developed a new Ka-Band waveguide isolator that is designed for downconverters used in space applications. The isolator can operate between 27.5 to 31 GHz with 0.15 dB insertion loss over 5% bandwidth and 20 dB isolation and return loss.
Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 43 to 46 GHz with industry standard interface of WR 22. With loss of 0.5 dB and 18 dB isolation, it is ideal for low noise figure Satcom receivers.
Renaissance has developed a new S band drop-in circulator that is designed for amplifiers used in space applications. The isolator can operate between 2.2 to 2.4 GHz with 0.5 dB insertion loss and 20 dB isolation and return loss.
Renaissance has produced a new low loss L-band high power drop-in circulator to protect PA's used in military radio transmitters. Covering 1025 to 1095 MHz, this circulator has just 0.25 dB of insertion loss over -55 to +85 C while handling 1300 W peak at 1% duty cycle.
Renaissance has designed a Ka band microstrip isolator that can handle 2 W forward and reverse for satcom applications. With a compact 5 x 6 mm size, it provides low insertion loss in the forward direction and high isolation in the reverse direction.
Renaissance has designed a new dual junction circulator for LTE application that can operate from 700 to 915 MHz and provide over 50 dB isolation within the band. Aimed for Test and Measurement application, this device can handle 100 W with -150 dBc intermod products."