Passive Components

* Two Novel Radar Vehicle Detectors for the Replacement of a Conventional Loop Detector

Introduction to intrusive and non-intrusive radar vehicle detectors developed at 24 GHz
TECHNICAL FEATURE Two Novel Radar Vehicle Detectors for the Replacement of a Conventional Loop Detector In this article, intrusive and non-intrusive radar vehicle detectors, compatible with existing inductive loop detectors (ILD) without any modification of the communication algorithm, have been developed at 24 GHz. The intrusive detector is based...
Read More

A Ka-band Planar Printed Antipodal Linearly-tapered Slot Antenna

Measurement, fabrication and design of a 27 to 32 GHz Ka-band planar antipodal linearly-tapered slot antenna
TECHNICAL FEATURE A Ka-band Planar Printed Antipodal Linearly-tapered Slot Antenna A Ka-band (27 to 32 GHz) planar antipodal linearly-tapered slot antenna (ALTSA) is designed, fabricated and measured. The numerical simulation was performed by 3D finite-element method (FEM). The printed ALTSA has been realized by using an RT/Duroid printed circuit...
Read More

Complex Coaxial-waveguide Transitions at Millimeter-waves

Description of two types of coaxial-waveguide transtitions experimentally investigated over a wide frequency range at millimeter-waves
TECHNICAL FEATURE Complex Coaxial-waveguide Transitions at Millimeter-waves Millimeter-waves have been used in commercial applications during the last decade as a result of the growing development of microwave multipoint distribution systems, local multipoint distribution systems, and digital audio and video broadcasting. In spite of many proposed simulation methods, experimentation remains...
Read More

MEMS for RF/Microwave Wireless Applications: The Next Wave ­ Part II

Description of the possibilities afforded by MEMS in system integration and novel architectures
TUTORIAL MEMS for RF/Microwave Wireless Applications: The Next Wave ­ Part II Microelectromechanical systems (MEMS) technology is on the verge of revolutionizing RF and microwave applications.1 The requirements of present day and future RF and microwave systems for lower weight, volume, power consumption and cost with increased functionality, frequency...
Read More

Low Phase Noise Voltage Tunable Oscillators

Introduction to a new line of fast tuning, low phase noise voltage tunable oscillators
PRODUCT FEATURE Low Phase Noise Voltage Tunable Oscillators Paratek Columbia, MD Driven by the VCO market's insatiable need for lower phase noise and wider tuning ranges, a new line of voltage tunable oscillators (VTO) has been introduced with superior performance in these areas. The new VTOs operate at fundamental...
Read More

Miniature, High Performance GPS RF SAW Filters

Introduction to a new GPS Rx surface acoustics wave filter designed to address key performance specifications
PRODUCT FEATURE Miniature, High Performance GPS RF SAW Filters Location-based products using Global Positioning Satellite (GPS) signals are poised to revolutionize wireless service. Implementation of federally mandated mobile subscriber location requirements is fueling the rush to market. Meanwhile, manufacturers plan to capitalize on the presence of GPS-enabled mobiles by...
Read More

High Speed Analysis and Optimization of Waveguide Bandpass Filter Structures Using Simple Neural Architectures

Presentation of a simple and accurate neural architecture to facilitate the design of waveguide bandpass filter stuctures
TECHNICAL FEATURE High Speed Analysis and Optimization of Waveguide Bandpass Filter Structures Using Simple Neural Architectures At microwave frequencies, from about 7 to 60 GHz, inductive irises are very often used as coupling networks between half-wavelength cavities in rectangular waveguides to develop very selective low loss bandpass filters. This...
Read More

Power Efficient MMIC Frequency Triplers

Presentation of an approach to optimize the power efficiency of an MMIC frequency tripler
TECHNICAL FEATURE Power Efficient MMIC Frequency Triplers The design of an efficient frequency tripler for an S-/X-band communications receiver is described. An approach for optimizing the tripler for best power efficiency is presented. The tripler topology consists of the harmonic generator circuit, a bandpass filter and an amplifier. A...
Read More

SiGe Power Amplifier ICs with SWR Protection for Handset Applications

Detailed description of how SiGe technology is used to develop power amplifier ICs for wireless handset applications
TECHNICAL FEATURE SiGe Power Amplifier ICs with SWR Protection for Handset Applications Joe Pusl and Srikanth Sridharan IBM San Diego RFIC Design Center Encinitas, CA Philip Antognetti, David Helms, Anurag Nigam, James Griffiths, Kenneth Louie and Mark Doherty IBM Boston RFIC Design Center Lowell, MA In recent years there...
Read More

Low Cost Directional Couplers

A new series of low cost, high quality directional couplers is featured
ON THE COVER Low Cost Directional Couplers Mini-Circuits Brooklyn, NY Ever expanding applications of RF and microwaves for wireless and cable applications have revived the development efforts of components at these frequencies. There is a continuing demand to reduce size and cost, and to improve performance and quality at...
Read More