Antennas

Subscribe

Technical Feature A 2.4 GHz Polarization-diversity Planar Printed Dipole Antenna for WLAN and Wireless Communication Applications This article presents the design simulation, fabrication and measured performance of a 2.4 GHz polarization-diversity printed dipole antenna for wireless communication applications. Two orthogonal printed dipole antennas, each with a microstrip via-hole balun...

Product Feature Low Cost Phased Array Antennas for BWA Applications e-tenna Corp. Laurel, MD Today, most broadband wireless access (BWA) customer premise equipment (CPE) use fixed-beam antennas. These are generally either reflector (dish), or flat-panel array antennas. These antennas have generally been selected based on value - meeting a...

Technical Feature Characteristics of a Large Bandwidth Rectangular Microstrip-fed Inserted Triangular Patch in a Circular Slot Antenna The characteristics of a rectangular microstrip-fed triangular patch in a circular slot antenna have been analyzed using the finite-difference time domain (FDTD) method. The impedance and bandwidth of the proposed antenna greatly...

Technical Feature Design of a Circularly Polarized 2 x 2 Patch Array Operating in the 2.45 GHz ISM Band The design of a corporate feed network producing a sequential rotation for a 2 x 2 circular polarized patch array is presented in this article. The feed network has also...

Product Feature Cost-effective Wireless Antenna Measurement Systems MI Technologies Duluth, GA Two new antenna measurement systems have recently been introduced that add to the MI-3600 antenna measurement product line. The MI-3600 family is comprised of 20 antenna measurement systems for single- or dual-axis antenna pattern measurements in the popular...

Technical Feature Antenna Selection to Minimize Pointing Requirements Traditionally, when designing a satellite communications system, an allowance is made in the link budget for pointing loss. The earth station's antenna size is then selected to achieve the desired gain margin. In this article, a different approach called antenna optimization...

Technical Feature Axial Ratio Measurements of Single Circularly Polarized Antennas Robert Gunnels Andrew Corp. Orland Park, IL The measurement of antenna axial ratios must be done properly if accurate results are to be obtained. When measuring on a terrestrial antenna test range, a straightforward approach is often used whereby...

Technical Feature A Large Bandwidth T-shaped Microstrip-fed Ground Plane Slot Antenna The characteristics of a T-shaped microstrip feeding a ground plane slot antenna have been analyzed using the finite difference time domain (FDTD) method. The impedance and bandwidth of the proposed antenna depend highly on the design parameters. The...

TECHNICAL FEATURE A High Efficiency Bow-tie Antenna for Impulse Propagation An investigation into the problems associated with using modified dipole antennas to propagate temporally short electrical impulses is described. Experimental data is presented which shows that the time domain characteristics of the bow-tie antenna can be improved by reactively...

TECHNICAL FEATURE A Ka-band Planar Printed Antipodal Linearly-tapered Slot Antenna A Ka-band (27 to 32 GHz) planar antipodal linearly-tapered slot antenna (ALTSA) is designed, fabricated and measured. The numerical simulation was performed by 3D finite-element method (FEM). The printed ALTSA has been realized by using an RT/Duroid printed circuit...