Products

Subscribe

PMI Model No. PSD-6G16G-CD-1 is high power, switch box assembly that provides protection to front-end receivers when in the presence of high power signals.  This is accomplished by sensing the input signal level and then switching the input signal into 50 ohms terminations when a set threshold level is exceeded.  This assembly operates from 6.0 to 18.0 GHz and can handle input power levels up to 10 W CW.

PMI Model No. POB-16-48-22-LCA is a 4.0 to 8.0 GHz low noise amplifier which provides 16 dB of gain while maintaining a gain flatness of ±1.0 dB typically over the operating frequency. The noise figure is 3 dB typical and offers a typical OP1 dB of +22 dBm. The amplifier requires +12 to +15 VDC and the current draw is 225 mA typical.

PMI Model No. PS-360-3237-8-292FF is a high speed, millimeter wave, 8-bit digitally controlled, phase shifter that operates over the frequency range of 32.0 to 37.0 GHz.  This phase shifter offers a low insertion loss of 13 dB typically and maintains a VSWR of 1.8:1.  The total phase shift range is 358.593° having a step size of 1.406° and switches between states in less than 500 ns.

PMI Model No. PSD-2G6G-CD-1 is high power, switch box assembly that provides protection to front-end receivers when in the presence of high power signals.  This is accomplished by sensing the input signal level and then switching the input signal into 50 ohms terminations when a set threshold level is exceeded.  This assembly operates from 2.0 to 6.0 GHz and can handle input power levels up to 10 W CW.

PMI Model No. LM-18G40G-18-1W-292FF is an ultra-high speed, millimeter wave, high power RF limiter that operates over the frequency range of 18.0 to 40.0 GHz.  This limiter can handle input power levels up to 1 W CW and provides a leakage output power of +18 dBm maximum and +12 dBm typical.

PMI Model No. P8T-2G6G-90-T-55-SFF is a high speed, single pole, eight throw, absorptive switch that operates over the frequency range of 2.0 to 6.0 GHz.  This switch offers very-high isolation of 97 dB typical while maintaining a typical fast switching speed of 30 ns.  The operating input power rating is +23 dBm CW with an insertion loss of 3.5 dB.

PMI Model No. PDVAN-8018-60-8-OPT25DBM is an 8-Bit digitally programmable attenuator that operates over the frequency range of 8.0 to 18.0 GHz.  This model offers low loss of 3.6 dB typically and an attenuation range of 60 dB. This model was designed to handle input power levels up to +25 dBm CW under operating conditions and signal levels up to +30 dBm CW without damage. 

PMI Model No. PEC3-40-1D6G2D7G-15LM-SFF is a limiting amplifier that operates over the frequency range of 1.6 to 2.7 GHz and offers a limited output of 15 dBm  ± 2 dBm.  The saturated power frequency flatness is ±1.5 dB maximum with a gain of 35 dB minimum and a typical noise figure of 4.5 dB.  The 2nd harmonic rejection is 24 dBc typically with an OIP3 of +18 dBm typical.

The HX4105 is designed as a reference clock frequency translator for use with the HA7000 series phase noise analyzers. The key design requirement was to maintain the extremely low phase noise characteristics of high performing 5 MHz references, and up convert to 10 MHz for the most accurate phase noise measurement.