advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Products

50 ohm Termination

January 17, 2011
The model ANNE-50X is a 50 ohm termination that offers wideband coverage of DC to 20 GHz.
Read More

MMIC Amplifiers

January 17, 2011
This family of “Lee” MMIC amplifiers is highly reliable, extremely broadband and low in cost.
Read More

Low Pass Filters

January 17, 2011
The LFTC series of low pass filters operate in a frequency range from DC to 5400 MHz.
Read More

SP2T Reflective Switch

January 17, 2011

American_MicrowaveSWN-RAYR-2DRThe model SWN-RAYR-2DR is a single-pole, two-throw, reflective switch module with options HPE2W, HS30NS and LVT25MV.


Read More

SPST Switch: SWM-6000-1DTU

January 17, 2011

SWM-6000-1DTU-ECL-GBThe model SWM-6000-1DTU option 011 is an absorptive/non-reflective SPST switch that operates from 10 MHz to 6 GHz (other frequencies are available). Insertion loss is less than or equal to 1.25 dB at 10 MHz and less than or equal to 3.5 dB at 6 GHz.


Read More

PIN Diode Switch

January 17, 2011

MSN-2DT-05-INDThe model MSN-2DT-05-IND with option 561R310H01 is an absorptive, SPDT PIN diode switch that operates from 50 to 500 MHz. This hermetically sealed switch offers a typical insertion loss of less than 1 dB, a typical isolation of 65 dB and a typical VSWR of 1.25.


Read More

SP2T Terminated Switch

January 17, 2011

SP2TterminatedSwitchThe model SWN-218-2DT option NS is a single-pole, two-throw, terminated switch module that offers an insertion loss of 1.2 dB typical, high isolation of 80 dB minimum and an integral TTL driver.


Read More

Threshold Detector/Coupler/Switch

January 17, 2011

tdcsThe model TDCS-4T-10F-HP is an integrated threshold detector, 17 dB coupler and SPDT PIN diode switch. This device operates from 9 to 10.5 GHz (other frequency ranges are also available), with an insertion loss of 2 dB maximum, VSWR of 1.5 maximum, 2 W average RF input power handling capability and TTL threshold output.


Read More

Two-Way Power Divider

January 17, 2011

RFOC-811-QRC-2-PDThe model RFOC-811-QRC-2-PD is a 6 to 13 GHz two-way power divider. The insertion loss from 6 to 12 GHz and 12 to 13 GHz are 0.6 dB maximum and 0.9 dB maximum, respectively. The isolation in the entire frequency range is 18 dB minimum.


Read More

Quadrature Hybrid

January 17, 2011

QC-052-YR3The model QC-052-YR3 is a 3 dB quadrature hybrid that when a signal is applied to any port the hybrid will split that signal equally between the ports on the side away from the input with the port adjacent to and on the same side as the input port remaining isolated.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement