The RF3021 is a reflective single-pole double throw (SPDT) switch designed for general purpose switching applications which require low insertion loss and high power handling capability. Ideally suited for battery operated applications requiring low insertion loss and switching with very low DC power consumption.
The Durel Division of Rogers Corporation has announced an addition to its high-performance electroluminescent (EL) lamp driver integrated circuits (ICs) - D392A. The D392A EL lamp driver delivers the programmable output voltages needed to power a wide range of EL lamps, including in portable applications such as cellular telephones, data organizers and PDAs, remote controls, monochrome LCDs, and DFLX™ EL keypad lamps.
The HMC-C062 is a fanout buffer designed to support data transmission rates of up to 50 Gbps. The device can also operate with clock signals up to 30 GHz. The input is broadband from DC to 30 GHz. During normal operation, input data (or clock) is transferred to both output channels. Differential input signals to the HMC-C062 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled.
Mini-Circuits PHA-1+ Ultra High Dynamic Range MMIC Amplifier supports low intermodulation amplification over the broad frequency range of 50 MHz to 6 GHz. This design provides a unique combination of high Output IP3 (typically +42 dBm) while maintaining a noise figure less than 3 dB up to 4 GHz and typical gain of 14 dB at 2 GHz.