Products

Subscribe

PMI Model No. PS-360-900M930M-6-SFF is a 900 to 930 MHz, 6-BIT digitally controlled phase shifter having a LSB of 5.6 degrees. The insertion loss is 7 dB typical, 7.5 dB maximum with a typical VSWR of 2.0:1. This is a high speed phase shifter that can switch from one phase state to the next in typically 250 nsec.

PMI Model LM-6D7G7D9G-30W-SFF is a RF limiter that operates in the 6.7 to 7.9 GHz frequency range. This limiter can handle 30 W CW input power and provides a maximum leakage of +18 dBm. This model has a low insertion loss of 1.1 dB maximum and a recovery time of 10 usec maximum.

PMI Model No. P1T-26D532D5-90-1212-292FF is an absorptive, single pole, single throw, solid-state switch that operates over the frequency range of 26.5 to 32.5 GHz. This model provides a minimum isolation of 90 dB and maintains low insertion loss of 5.0 dB maximum. The VSWR is 2.0:1 maximum into 50 ohms impedance and offers switching speeds of 25 nsec maximum and 15 nsec typical.

PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10 to 40 GHz. This model provides over 60 dB of isolation and has an insertion loss of 6 dB maximum. The VSWR is better than 2.0:1 into 50 ohm impedance.

CST PARTICLE STUDIO (CST PS) is a specialist tool for the fast and accurate analysis of charged particle dynamics in 3D electromagnetic fields. This software tool is based on the multi-purpose 3D EM modules in CST STUDIO SUITE such as the CST EM STUDIO electro and magnetostatic solver. It is fully embedded in CST DESIGN ENVIRONMENT, thus benefitting from its intuitive modelling capabilities and powerful import interfaces.

CST MPHYSICS STUDIO (CST MPS) is a powerful and easy-to-use tool for thermal and mechanical stress analysis. Systems and devices very rarely fall neatly into just one area of physics, and multiphysics simulation is often necessary for a complete simulation of the device’s characteristics.

CST PCB STUDIO (CST PCBS) is a specialist tool for signal integrity (SI), power integrity (PI), and electromagnetic compatibility (EMC)analysis on printed circuit boards (PCB). It integrates easily into your design flow by providing powerful import filters for popular EDA tools from Cadence, Mentor Graphics, Zuken, and Altium. Prior to modeling and simulation, the imported layout is automatically checked in order to correct potential geometric errors.

CST CABLE STUDIO (CST CS) is dedicated to the three-dimensional analysis of signal integrity (SI), conducted emission (CE), radiated emission (RE), and electromagnetic susceptibility (EMS) of complex cable structures in electrically large systems. It provides powerful import filters from popular MCAD and ECAD tools for smooth integration into the industrial workflow.

CST BOARDCHECK is an EMC and SI rule checking program that reads popular board files from Cadence, Mentor Graphics, and Zuken as well as ODB++ (e.g. Altium) files. It checks the PCB design against a suite of EMC or SI rules. The kernel used by CST BOARDCHECK is the well known software tool EMSAT.

Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 20.2 to 21.2 GHz with industry standard interface of WR 42. With loss of 0.2 dB and 26 dB isolation, it is ideal for low noise figure Satcom receivers.