Products

Subscribe

Renaissance Electronics Corporation’s System Group has designed a dual 48 x 4 switch matrix for ATE applications that can cover from 700 MHz (LTE) to 6 GHz (Wi-Fi) frequencies. Using high reliability solid state switches, the switching speed is on the order of nanoseconds helping test handsets and other portable communication devices with minimum delay time.

The HGM and HGV series Gunn Oscillators cover the 7 to 150 GHz frequency range. A wide variety of designs provide solutions for most applications. Units are available with mechanical and/or electrical tuning, providing many possible tuning configurations.

The HHPAE-459 power amplifier covers the frequency range from 71.0 to 76.0 GHz. The amplifier has an output P1dB of +18 dBm with small signal gain of 29 dB. MMIC technology is employed for high reliability and repeatability.

Renaissance Electronics has designed a new drop-in isolator for Satcom applications covering the 30 to 33 GHz frequency range (Model No. 2L9NEU-RoHS). The unit has less than 1 dB Insertion Loss and more than 16 dB Isolation and Return Loss over the temperature range -20 to +60°C.

Model SFB-06-E2 from SAGE Millimeter Inc. is a D-Band, externally biased balanced mixer. The mixer employs high performance GaAs Schottky beamlead diodes, balanced configuration and proprietary bias circuitry to produce superior RF performance with very low LO pumping level. The low LO pumping level is desirable feature at higher millimeterwave bands.

The NI PXIe-5186 digitizer, co-developed by National Instruments and Tektronix, delivers a new level of performance in the small-form-factor, low-power PXI platform. Tektronix technology provides the trusted measurement fidelity of Tektronix oscilloscopes.  The digital back end uses NI synchronization and memory core (SMC) technology to deliver high-data throughput at rates greater than 700 MB/s.

The HA7062A is a fully integrated phase noise analyzer. It utilizes the same core engine from our model HA7402A along with a pair of HSM6001A HSM Series RF synthesizers. The stability of the agile synthesizers operating as LO sources for the high speed, cross correlation core enables an extremely reliable phase noise analyzer with, ultra fast data acquisition speeds.

Model SDLVA-0R71R3-75-CD-3 is a successive detection log video amplifier that operates over the 700 to 1300 MHz frequency range. This model has a Dynamic Range of 75 dB, a log slope of 40 mV/dB.  The log linearity is ±1.2 dB typical from -65 to +5 dBm input power levels and a typical TSS of -70 dBm.

CST MICROWAVE STUDIO (CST MWS) is a specialist tool for the 3D EM simulation of high frequency components. CST MWS' unparalleled performance makes it first choice in technology leading R&D departments. CST MWS enables the fast and accurate analysis of high frequency (HF) devices such as antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects.