advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Industry News

Third-generation Wireless Test Equipment Requirements

New technology enhancements that will be found in third-generation wireless systems and the equipment needed to evaluate these designs
Rob Van Brunt
No Comments
Third-generation Wireless Test Equipment Requirements Rob Van Brunt Telecom Analysis Systems Inc. Eatontown, NJ Although the technology rollout is still several years away, development of third-generation (3G) wireless systems is well under way. During this critical development phase, manufacturers are making strategic decisions on the most appropriate modulation, protocol...
Read More

Current Techniques for Tuning Dielectric Resonators

Advantages and disadvantages of the various electronic tuning techniques for dielectric resonators
B.S. Virdee
One Comment
Current Techniques for Tuning Dielectric Resonators Electronic tuning of dielectric resonators over a relatively wide range while also preserving their characteristics is highly desirable, especially for use in nonaccessable systems such as airborne or spaceborne systems or in areas of high sophistication such as cellular radio systems. This article...
Read More

The Age of the Precision Oscillator: The Role of the TCXO and the DCXO

Temperature-compensated crystal oscillators (TCXO) and digitally compensated crystal oscillators (DCXO), which feature high stability and are good candidates for use as precision reference oscillators in various applications
Bill Jennewein
No Comments
The Age of the Precision Oscillator: The Role of the TCXO and DCXO Bill Jennewein M-tron Industries Inc. Yankton, SD The need for quality, high precision timing devices is increasing daily. The heart of all communications is linked directly to a stable and dependable source of frequency control. Computer...
Read More

COMPONENTS

No Comments
COMPONENTS SP4T Nonreflective Switch The model AS115-61 high isolation, SP4T nonreflective switch operates with 0 and -3 V or -5 V over the DC to 2 GHz frequency range. The switch delivers low insertion loss of 0.7 dB at 0.9 GHz with high isolation of 50 dB at 0.9...
Read More

MATERIALS

No Comments
MATERIALS Low Loss Dielectric Materials The ECCOSTOCK" series low loss dielectric materials for microwave applications feature dielectric constants ranging from 1.04 to 30 with loss tangents of < 0.002. The material is effective in antennas as a lens and in patch antennas as the spacer dielectric. It is also...
Read More

SYSTEM

No Comments
SYSTEM 800 MHz Data Transceiver The model DT800 800 MHz data transceiver operates over a frequency range of 806 to 866 MHz with an operating temperature range of -30° to +60°C. Additional features include a 25 W output power, forward error correction, data interleaving for burst error protection, high...
Read More

ANTENNAS

No Comments
ANTENNAS Cellular/GSM Low Profile Patch Antenna The model S8248P12NF cellular/Global System for Mobile communications (GSM) antenna features a low profile design for minimum visual impact for discreet antenna installations. The unit is engineered with high quality etched copper circuitry to improve cellular service quality, decreasing both interference and lost...
Read More

AMPLIFIERS

No Comments
  AMPLIFIERS Broadband, Small-signal Amplifier The model PE1-38-0218-12/-6V-SFF 2 to 18 GHz amplifier is capable of gains of more than 40 dB. The unit's noise figure is 5.5 dB (max) from 2 to 14 GHz and 6 dB (max) from 14 to 18 GHz. SWR is 2 (max), P1dB...
Read More

DEVICES

No Comments
DEVICES 2 - 18 GHz Diode Detector The model DD-20-218-5PF-1N 2 to 18 GHz diode detector (useable to 500 MHz) features an ultra-fast response time of £ 5 ns, voltage sensitivity of 700 mV/mW (typ) and tangential signal sensitivity of -50 dBm at 2 MHz video bandwidth. Frequency flatness...
Read More

SOURCES

No Comments
SOURCES Ultra-miniature Ceramic Chip Resonators The SSR series ultra-miniature ceramic chip resonators are supplied in a small surface-mount package measuring 3.2 x 2.1 x 1.5 mm and incorporate built-in load capacitors that simplify circuit designs and reduce assembly costs. The units are suitable for clock applications in cellular telephones,...
Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement