Microwave Journal
www.microwavejournal.com/articles/31580-avx-introduces-ultraminiature-thin-film-transmission-line-capacitors

AVX Introduces Ultraminiature, Thin-Film Transmission Line Capacitors

January 2, 2019

AVX Corp. introduced a new line of ultraminiature, thin-film transmission line capacitors for high frequency links, DC blocking in the UHF range (300 to 3 GHz) and other high performance microwave and RF applications. The new capacitors have a novel metal-insulator-metal (MIM) structure, copper traces for optimal circuit conductivity, a transmission line wire-bond pad and a gold-metallized backside ground and can be supplied on a variety of low-loss substrates, including quartz, alumina, glass and silicon. The new transmission line capacitors are also available in a wide range of capacitance values: 0.3 to 50 pF with a ±20 percent tolerance, and each is made using a high frequency structure simulator (HFSS) to proactively address any electromagnetic challenges and provide the highest possible RF performance and reliability.  

“Our new thin-film transmission line capacitors are developed using ultra-precise HFSS designs for optimized circuit conductivity and RF performance. They offer a wide range of capacitance values and several customizable features, including impedance values and substrate material and thickness, and are also gold-wire bondable and RoHS compliant, enabling their employment in a broad range of high-performance microwave and RF applications,” said Larry Eisenberger, principal technical marketing engineer at AVX.

The new transmission line capacitors are available in three standard substrate thicknesses: 5, 10 and 15 mils and two standard substrate widths: 20 and 40 mils, and have design-dependent lengths determined by transmission line dimensions. Average lengths are generally in the realm of 20 to 80 mils, but lengths up to and beyond 320 mils are not altogether uncommon.

The range is rated for up to 100 V, has specific capacitance values ranging from 50 to 100 pF/mm2, a dissipation factor of less than 0.1 percent and a TCC value of ±60 ppm/ºC, and exhibits 50 Ω standard impedance; although, actual maximum capacitance values also depend on transmission line dimensions. Custom impedance values, substrate materials, and substrate thicknesses are available upon request.

The new transmission line capacitors are also RoHS compliant and are tested to MIL-STD-883-2011.8 for bond strength, MIL-STD-883-2018 for shear strength and MIL-STD-202-108 for lifetime. Packaging options include: antistatic waffle pack, tested but un-diced and tested and diced on tape and lead-time for the series is currently 14 weeks.