advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''performance''

Analog Devices unveils 2.5-GSPS A/D converter, driver amplifier and rapid prototyping FMC module

Analog Devices Inc. announced immediate availability of the AD-FMCADC2-EBZ FMC module with HDL code and software drivers for rapid design prototyping and interoperability with Xilinx FPGAs. The AD-FMCADC2-EBZ board incorporates the 12-bit, 2.5-GSPS AD9625-2.5 A/D converter and the ADA4961 RF amplifier, also introduced today, with input balun, power supplies and software stack.


Read More

Skyworks introduced suite of breakthrough ultra low noise amplifiers at MTT-S 2014

Skyworks Solutions Inc., an innovator of high performance analog semiconductors enabling a broad range of end markets, unveiled a suite of new, ultra-low noise amplifiers (LNAs) for cellular infrastructure, wireless connectivity and broadcast communication applications.  The new LNAs provide best-in-class noise figure as well as high gain and linearity, improving receiver sensitivity and dynamic range.


Read More

Diamond Microwave launches ultra-compact 2 – 6GHz GaN SSPA

Diamond Microwave, a specialist in high performance microwave power amplifiers, is extending its range of GaN-based solid-state power amplifiers (SSPA) to include a 2 - 6GHz model that can be operated in either pulsed or CW mode.

 


Read More

Vectron International announces small form factor low G-sensitivity TCXO

Vectron International, a leader in the design and manufacture of precision oscillators and timing solutions for communication, industrial, military & space applications, announced the release of a low g-sensitivity TCXO for military, industrial and other harsh environment applications. This product will be showcased in Booth 1305 at the IMS 2014 Symposium in Tampa, FL from June 3-5th 2014.


Read More

Granite River Labs’ USB 3.0 protocol performance and stress test software helps developers maximize USB 3.0 products

Granite River Labs (GRL), a USB-IF authorized test center, today announced the USB 3.0 Protocol Performance and Stress Test Software Suite (GRL-USB3-PROTO). GRL-USB3-PROTO allows USB developers quickly optimize the performance and robustness of their USB 3.0 products in development while unlocking the full potential of their Teledyne LeCroy Voyager USB 3.0 Analyzer/Exerciser.


Read More

New spectrum analyzers up to 7.5 GHz from Rigol

Rigol Technologies, Inc. announces their latest series of products: two new high-performance, high frequency spectrum analyzers built on the extremely popular DSA800 series platform. The DSA832 and DSA875 expand the DSA800 series spectrum analyzer family to 3.2 and 7.5 GHz respectively. With specifications that far exceed the DSA815-TG these new instruments enable direct measurements of higher performance signals and systems.


Read More

New microwave absorber introduced by Cuming Microwave Corp.

Cuming Microwave announced a new microwave absorber for use in cavity resonance suppression between 800 MHz – 18 GHz. C-RAM™ RGD-S-192 is a thin, flexible, highly magnetically loaded silicone absorber used in applications where performance cannot be traded for a thicker material. C-RAM™ RGD-S-192 is standard at 0.040’’ (1.01 mm) thick and is ideal for suppressing waves within cavities of microwave modules and other electronics where physical space is limited.


Read More

Crane Aerospace & Electronics Microwave Solution launches the ku-band 4-way Iso-Divider for space applications

Crane Aerospace & Electronics Microwave Solution launches the new ku-band 4-way Iso-Divider designed for use in satellite applications. This unit represents a further expansion of the products available in this product line. The Iso-Divider combines the functions of high performance power dividers with ferrite isolators to provide a high isolation power divider solution, making the external isolators redundant, for satellite receiver applications, without introducing complex switch-based solutions.


Read More

Vectron International announces small form factor low noise VCXO

Vectron International, a leader in the design and manufacture of precision oscillators and timing solutions for communication, industrial, military & space applications, announces its new VX-805 5.0 x 3.2 mm package VCXO. The VX-805 has phase noise performance specifically optimized for wireless base station applications. This product will be showcased in Booth 1305 at the IMS 2014 Symposium in Tampa, FL from June 3-5th, 2014.


Read More

TI expands clock and timing portfolio offering industry’s best noise performance

Texas Instruments introduced the industry’s highest-performance 14 GHz fractional-N PLLatinum® phased-locked loop (PLL) with advanced frequency modulation. The LMX2492 offers the industry’s best noise performance, 6 dB better than the nearest competitor, for improved radio frequency (RF) sensitivity and radar range and accuracy. The device also supports a 200 MHz phase frequency detector, a 5 V charge pump supply and a wide operating frequency range of 500 MHz to 14 GHz. The LMX2492 is offered in industrial and automotive grade (class 1) for military and automotive radar, microwave backhaul, communications, and test and measurement applications. For more information or to order samples and an evaluation module (EVM), visit www.ti.com/lmx2492-pr.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement