advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''device''

Lake Shore IMS exhibit to feature high-frequency probing and characterization technology

May 29, 2014

Lake Shore Cryotronics, a leading innovator in solutions for measurement over a wide range of temperature and magnetic field conditions, announces that it will be exhibiting at the June 3–5 IEEE MTT International Microwave Symposium (IMS) in Tampa Bay, Fla., where it will discuss platforms that enable the study of devices and materials using high-frequency measurements.


Read More

Richardson RFPD introduces new 470–960 MHz 0.8W power amplifier from Wavelex

April 28, 2014

Richardson RFPD, Inc. announces immediate availability and full design support capabilities for a new 0.8W power amplifier from Wavelex.

The WPA0409A offers wide frequency band operation, from 470 MHz to 960 MHz, with 50 Ohm impedance, and features +29 dBm P1dB, 14 dB gain and +43 dBm IP3. It is versatile for a range of applications, including VHF, UHF, PA driver amplifiers, RF bench test, and fixed wireless communications.


Read More

New Vishay Intertechnology inductor

April 24, 2014

Vishay Intertechnology Inc. introduced a new automotive-grade IHLP® low-profile, high-current inductor with an industry-high continuous operating temperature range to +180 °C. Offered in the 2525 case size with a low profile of 3.0 mm, the new Vishay Dale IHLP-2525CZ-8A provides a wide range of inductance values from 0.47 µH to 22 µH.


Read More

Richardson RFPD introduces new wideband 10W SPDT switch from Wavelex

April 22, 2014

Richardson RFPD Inc. announces immediate availability and full design support capabilities for a new wideband, 10W single-pole, double-throw (SPDT) switch from Wavelex.


Read More

Richardson RFPD introduces new 12 to 16 GHz integrated down converter from UMS

April 15, 2014

The CHR3763is a multifunction monolithic receiver, which integrates a balanced cold FET mixer, an LO buffer, and an RF low noise amplifier. It is ideally-suited for Ku-band VSAT applications, as is also versatile for a wide range of other applications, from military to commercial communications systems.


Read More

Richardson RFPD introduces new 1.0–4.0 GHz 2-way power divider/combiner from Wavelex

April 14, 2014

The SMA-connectorized, zero-degree WPD1040A is a Wilkinson-type power divider/combiner and features a low insertion loss of 0.50 dB (typical), high isolation of 18 dB (minimum) and excellent VSWR. It is suitable for LTE and land mobile radio (LMR), as well as RF bench test and mobile base station applications.


Read More

Anite is first to offer 4x4 MIMO device testing capability

April 10, 2014

Anite, a global leader in wireless equipment testing technology, announced that it is first to offer chipset and device manufacturers the ability to verify their 4x4 Downlink (DL) MIMO designs and products, accelerating the development of LTE and LTE-Advanced devices. The milestone was achieved in close collaboration with a leading device manufacturer using Anite’s Development Toolset - an easy to use solution for early stage testing.. 


Read More

Sonnet introduces Blink, the first full-wave multi-solver suite for on-chip passive device modeling

Software/EDA
March 11, 2014

Sonnet Software Inc. introduces Blink™, the first multi-solver passive device modeling suite, now available for purchase. Blink operates entirely from within the Cadence® Virtuoso® environment and is used for the analysis of on-chip passive devices such as spiral inductors and MIM capacitors.


Read More

Agilent simulation & modeling software selected by Nitronex for high-power GaN design

February 11, 2014

Agilent Technologies Inc. announced that Nitronex, a GaAs labs company and leading producer of GaN-on-silicon RF power devices, has selected Agilent to provide a complete GaN design flow that spans both device modeling and circuit simulation. The flow uses Agilent EEsof EDA’s IC-CAP model extraction software and Advanced Design System (ADS) circuit and system simulator—both market-leading platforms in RF and microwave design.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement