advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Articles Tagged with ''band''

High performance V590ME09-LF by Z-Communications

 Z-Communications Inc. announces a new RoHS compliant VCO (Voltage Controlled Oscillator) model V590ME09-LF. The V590ME09-LF operates over the frequency range of 850 to 1050 MHz within 0.5 to 5.0V of tuning. This unmatched VCO features a spectrally clean signal of -100 dBc/Hz @ 10 kHz offset while operating off a 5 Vdc supply and drawing only 15 mA of current. 


Read More

A Wilkinson power divider from Dielectric Laboratories

 From Knowles Capacitors comes a Wilkinson power divider from their Dielectric Laboratories (DLI) facility.  It is designed to provide in phase power splitting or combining over a broad bandwidth in low power applications.  This is achieved by application of precision thin film fabrication with integrated resistors, coupled with DLI’s high permittivity ceramic materials, to provide a high performance and repeatable design solution. 


Read More

CTS debuts ClearPlex® waveguide duplexer at IMS 2014

CTS Corporation, through its subsidiary, CTS Electronic Components Inc., announces its new ClearPlex® Waveguide Duplexer, delivering performance comparable to air-cavity with 2x to 4x smaller size, for cellular infrastructure, 6-10 GHz microwave, NLOS backhaul and military communications. CTS will be displaying and demonstrating performance of these new RF ceramic waveguide filters on 3-5 June, 2014 at the IEEE International Microwave Symposium (IMS) in Tampa, FL, USA, at booth number 322.


Read More

Broadband System: VectorStar™ ME7838D

VectorStar ME7838DAnritsu Co. establishes a new standard in broadband performance with the introduction of the VectorStar™ ME7838D broadband system that provides industry-best frequency coverage of 70 kHz to 145 GHz in a single sweep using a coaxial test port. The VectorStar ME7838D gives design engineers greater confidence when performing on-wafer device characterization at 70 GHz and beyond.


Read More

Skyworks introduces scalable antenna switch solutions supporting LTE and CA at MWC

Skyworks Solutions Inc., an innovator of high performance analog semiconductors enabling a broad range of end markets, unveiled a set of antenna switch solutions supporting LTE, LTE-Advanced and next-generation carrier aggregation architectures.  The portfolio includes highly integrated antenna switch modules (ASM) as well as transmit and receive diversity switches.  The dual-mode MIPI® RFFE-compliant modules are modem agnostic, making them compatible with every leading chipset provider.


Read More

Skyworks launches next-generation SkyOne front-end solutions

Skyworks Solutions Inc., an innovator of high performance analog semiconductors enabling a broad range of end markets announced that it has unveiled its second-generation SkyOne™ platforms. SkyOne™ is a family of fully optimized, scalable devices that integrate all of the high-performance RF and analog content between the transceiver and antenna into the industry’s smallest footprint.


Read More

Ultracompact R&S TSME drive test scanner provides maximum mobility for optimizing wireless networks

At Mobile World Congress 2014, Rohde & Schwarz will showcase the R&S TSME – a new, ultracompact drive test scanner for today's and tomorrow’s wireless communications standards and frequency bands.


Read More

Global BTS transceiver market volumes increased 87% in 2013

The global base transmitting station (BTS) transceiver (TRx) market grew by 87% in units in 2013 and was the most ever recorded, according to the latest report from EJL Wireless Research titled “Global BTS Transceiver Market Analysis and Forecast, 10th Edition, 2013-2018.” 


Read More

Ducommun LaBarge Technologies introduces mmWave externally biased balanced mixers

It is always a concern at high millimeter wave band that there is not enough power to drive the mixer, especially full waveguide band. Model FDB-XX-E1 series externally biased, balanced mixers is especially developed for this purpose. The mixers are offered in four waveguide bands to cover frequency spectra from 50 to 140 GHz. These mixers employ high performance GaAs Schottky beamlead diodes and balanced configuration to produce superior performance with a very low LO pumping level.


Read More

Wainwright Instruments showcasing digitally tunable UHF/microwave reject filters at EuMW

Wainwright Instruments introduces UHF/microwave band reject filters that can be tuned by computer with intuitively usable software or directly by simple LAN Telnet protocol. The passband up to 2.5 or 5.0 GHz resp. makes these filters especially suitable for measuring harmonics in laboratory applications and automated test stations in production lines.


Read More

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement