Programmable Digital Downconverter
The CommLink™ HSP50216 programmable digital downconverter (PDC) for cellular base stations delivers multiple channel processing of high dynamic range cellular protocols. The PDC contains four channels that can support up to four different protocols simultaneously, including IS-136 TDMA, GSM, EDGE, IS-95 CDMA, 3G and legacy protocols such as AMPS, enabling cellular operators to efficiently support multiple transmission protocols within the confines of one base station. The unit features on-board digital automatic gain circuitry, which, when used in conjunction with on-board digital filtering, provides gain to a low level signal while simultaneously attenuating out-of-band interfering signals. A small outline BGA package that reduces required board space is included. Price: $60 (1000).
Intersil Corp., Melbourne, FL (888) 468-3774, ext. 7976.
Spread Spectrum Data Transceiver
The model SS9600 spread spectrum data transceiver for use in point-to-point and point-to-multipoint systems features a built-in modem. Operating in the 2.4 GHz band and capable of 9600 bps over the air rate, the transceiver is a true frequency-hopper and can configure large systems with as many as 238 units. The transceiver is a true plug-and-play radio modem with built-in self-adjusting power control to ensure good communications.
RF Neulink, a division of RF Industries, San Diego, CA (800) 233-1728 or (858) 549-6340.
2 W Ku-band Transceiver
This 2 W transceiver comprises a solid-state power amplifier, a low noise amplifier, Ku-band to L-band converters and an orthogonal-mode transducer with waveguide filters. (An external reference oscillator is available.) Nominal input power is ±1 dB in the transmit section. The self-contained unit also features a micro controller and fault monitoring. Operating temperature range is -20° to +55°C.
TSAT, +47 23 037360, fax +47 23 037361 or e-mail: firstname.lastname@example.org.