Pin Diode Switch: P2T-1G18G-10-R-5V-SFF-HIP10W-HERM

P2T-1G18G-10-R-5V-SFF-HIP10W-HERMPMI Model No. P2T-1G18G-10-R-5V-SFF-HIP10W-HERM is a hermetically sealed, reflective, single pole, two throw pin diode switch that operates over the 1.0 to 18.0 GHz frequency range.  This model is capable of handling an input power level of 5 W CW while providing switching speeds of less than 40 ns typically.

Port to Port isolation is 25dB typically while providing low insertion loss of 2.5dB typical. The DC power required is a single +5VDC voltage with low current consumption of 35mA. This model incorporates a TTL compatible driver for easy system integration.

Specifications:

Frequency

1.0 to 18.0GHz

Isolation

25dB typ, 10dB min

Insertion Loss

2.5dB typ, 4.0dB max

VSWR In/Out

2.0:1

Operating Input Power

5W CW max.
(Not to be switched any higher than 50kHz [PRI])

1dB Compression

+40dBm Goal

RF Switching Speed

<40ns typ, 100ns max

Impedance

50 ohms

DC Voltage and Current

+5V @ 35mA typ

Control Signal

TTL Logic

Connectors

SMA(F) - Removable

Finish

Painted Gray
Bottom side - Unpainted

Size

1.2" x 1.0" x 0.5"

Environmental Ratings:

Temperature:

 -54ºC to +100 ºC Operating

 -55ºC to +125 ºC Non-Operating

 Shock:

 MIL-STD-202F, Method 213B Cond. B

 Vibration:

 MIL-STD-202F, Method 204D Cond. B

 Altitude:

 MIL-STD-202F, Method 105C Cond. B

 Temperature Cycle:

 MIL-STD-202F, Method 107

Logo

Post a comment to this article