- Buyers Guide
Military Microwaves Supplement
Recent Advances in Radar Technology
Using Calibration to Optimize Performance in Crucial Measurements
The MBA6-3.5DS45/2045 Multi-beam Hub Base Station Antenna has been developed by Cobham Antenna Systems, Microwave Antennas to enable multiple input multiple output (MIMO) radio system operators to meet their goal of 1 Gbps/km2 anywhere within a cell.
Designed for high speed MIMO 4G (and beyond) urban access for backhaul, this was originally a European Union funded project that has become a finished and available multi-beam antenna with additional military and security beneficial applications.
Projected deployment for this Hub Base Station antenna system is for it to communicate with a network of ‘below-rooftop’ Access Base Stations using existing structures. The system strategy with these access base stations will allow self-backhauling. This multi-beam antenna has 90˚ coverage (a 90˚arc) utilising six individual narrow beam patterns each with a half power beamwidth of 15˚. MIMO capability is provided with +/-45˚ polarisation in each of the six 15˚ sectors.
The advantage of this format is that a narrow beam can create high density coverage within a specific narrow area allowing for a high level of frequency re-use whilst being far more efficient that installing six separate narrow beam directional antennas. By positioning four multi-beam antennas in a square formation, complete 360˚ coverage is achieved as this provides 24 dual-polarised beams. The current system benefits from meeting ETSI specification for multi-beam antennas (EN 302 326-3 V.1.1.2) provides low side-lobe levels for greater system efficiency.
The antenna measures 586 mm high by 456 mm wide by 76 mm deep and it provides 2 x 6 beams each with 17 dBi peak gain. The antenna element comprises a single cross-dipole assembly operating at a centre frequency of 3.5 GHz interlocked in a configuration which provides a slant dual polar beam. Eight sets of these assemblies are fed in phase through a stripline feed to create the single 110˚ sector antenna which forms the basis for the array. There are 8 sector antennas in the complete assembly.
In order for the 6 (x2 polarisations) narrow beams to be formed to cover the 90˚ arc, two 8x8 Butler matrix beam forming devices are used to feed the separate ports of each antenna element. By a mechanism of fixed phase shifters and couplers the Butler matrices provide defined sets of phases into each of the 8 internal antenna elements which results in two sets of 6 skewed beams (The two outer ones covering +/-60º are not currently used).
Within the new unit the Butler matrix devices are fully integrated into the antenna eliminating the need for 16 phased-matched cables making for an efficient and cost-effective antenna. In this antenna the down-tilt is a nominal 2˚across the band of interest, i.e. 3.4 – 3.6 GHz with an elevation beamwidth of 10˚ to the half-power point.
For security and military applications the technology can be scaled to cover other frequency bands, with applications such as communications to multiple mobile platforms (ground or airborne).
Get access to premium content and e-newsletters by registering on the web site. You can also subscribe to Microwave Journal magazine.