advertisment Advertisement
This ad will close in  seconds. Skip now
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement
advertisment Advertisement

Agilent Introduces Fiber-optic Switches for More Cost-Effective Optical Manufacturing Tests

November 28, 2011
/ Print / Reprints /
| Share More
/ Text Size+

SANTA CLARA, Calif., Nov. 28, 2011 – Agilent Technologies Inc. (NYSE: A) today announced new optical switches that enable more cost-effective optical transceiver manufacturing tests and higher efficiency in optical component and cable verification.

Optical switches are used in fiber-optic test systems to automatically route optical signals. They are also used to optimize manufacturers’ investments in automated test equipment by improving repeatability and throughput and by supporting parallel measurements on multiport devices. Agilent’s new N77 Series switches accomplish these tasks with excellent repeatability and flexible automation control.

The Agilent N7731A dual 1x4 optical switch and the N7734A 1x13 optical switch are available for single-mode or multimode fiber-optic connections.

“Manufacturers of optical transmitters and receivers constantly strive for better yield and lower cost of test,” said Jurgen Beck, general manager of Agilent’s digital photonic test products. “Our new optical switches help them achieve their goals by making accurate measurements and making automation easier with excellent repeatability, fast switching time and flexible control with LAN, USB and GPIB interfaces.”

Key features and specifications include:
• Repeatability: ±0.01 dB, ±0.004 dB typical
• Switching time: < 20 ms
• Lifetime: > 1 billion cycles
• 816x VXI plug-and-play driver support
• N77xx viewer GUI

In many cases, manufacturers can use valuable signal source and analysis instrumentation more effectively in a parallel-test configuration. They can, for example, test multiple cables or components together during temperature cycling. Inherently parallel components – like those used for optical interconnections for 40G or 100G Ethernet using 10-Gb/sec components – call for identical testing in multiple paths. These applications are well supported by the 1x13 switch configuration, and the 13th path often can be used as a permanent reference path.

Automated testing with switches also improves tests by avoiding repeated reconnections during measurements. The excellent switching repeatability of the new N77 Series switches assures that the signal level is constant from cycle to cycle.

Multimode fiber applications are especially challenging because signals are distributed over a range of mode groups that can have different loss and delay in a link. For dependable multimode transceiver testing, the instrumentation should not change this modal distribution. The Agilent multimode switches are designed with very short collimated paths between fibers, so signals propagate in practically the same distribution as through uninterrupted multimode fiber.

Designed for high test throughput, lowest cost per channel and narrow footprint, all members of Agilent’s N77 Series optical test instruments are built on a common platform and provide a common PC-based user interface. A complete set of control interfaces (including LAN, USB2.0 and GPIB) simplifies integration with manufacturing control systems. Code-compatible with Agilent’s Lightwave Measurement System modules, the new generation of switches can serve as plug-in replacements in existing test solutions.

All N77 Series optical test instruments offer:
• “Just-enough-test” with low hardware overhead.
• Built-in international power supply.
• SCPI command set, compatible with existing instrument categories for easy drop-in replacement.
• Plug-and-play drivers and a PC-based graphical user interface.

Additional information about Agilent’s new optical switches is available at www.agilent.com/find/jet. High-resolution images are available at http://www.agilent.com/find/jet_images.

Additional information about Agilent’s N7700A photonic application suite can be found at www.agilent.com/find/n7700.

A backgrounder on optical component test technology and Agilent’s solutions is available at www.agilent.com/find/oct_backgrounder.

U.S. Pricing and Availability
The Agilent N7731A dual 1x4 optical switch and N7734A single 1x13 optical switch for single-mode and multi-mode applications can be ordered now. List prices for the N7731A start at $14,500. List prices for the N7734A start at $19,000.

Post a comment to this article

Sign-In

Forgot your password?

No Account? Sign Up!

Get access to premium content and e-newsletters by registering on the web site.  You can also subscribe to Microwave Journal magazine.

Sign-Up

advertisment Advertisement